Fab501

Thanks Pauwel I have try to add vTaskDelay(1000); with a ifdef WITH_U8G2_SH1106 but that does not work. I have try with Oled SsD1306 no problem and with SH1106 alone without...

For the Display of information from BMP280 you are wright reducing to 1Hz resolve the lack of refresh 👍

Hi Pauwel, Thanks for your work, I have git clone Esp32-OGNTracker and reflash with your changes. I have soldered Oled SH1106 with BARO BMP280 to avoid defect contacts Like before...

Is there a way to display Pressure Altitude in Feet and Vario in Feet/min ? Thanks

Dear Pauwel thanks a lot, In fact the display don't need a gps lock but wait to have the GPS time... I will check your new code tomorrow and let...

Dear Pawel, That seems to works fine now. Indoor or Outdoor. After first flash the display don't give time and so no BARO value neither. I goes outdoor and immediately...

Hi Pawel, Just to confirm that after a night power off when power on the time is not set and indoor due to the cellular concrete house there are no...

Hi Pawel Happy new Year Just to give last information, I have receive last version of T-BEAM v1.1 from AliExpress SX1262 and M8N and pigtail Antenna AND I have no...

Yes both versions I have ordered was v1.1 T-BEAM Lilygo but the first use a fix SMA connector for antenna a GPS M6N and a Lora32 with SX1276 and the...

Hi Bortek, Here the Config I used with T-BEAM SX1262-M8N and OLED 1.3" SH1106 and BME280 and Bluetooth and STRATUX you can adapt for your need: #define DEFAULT_AcftType 8 //...