This configuration knob permits to set value of : proc/sys/net/mpls/conf//input. Even if underlying interface is not available at the moment of the call.

Signed-off-by: Philippe Guibert [email protected]

Aug 27 '21 14:08 pguibert6WIND

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 9c0a6546
Date	08/27/2021
Start	10:11:02
Finish	10:37:24
Run-Time	26:22
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-27-10:11:02.txt
Log	autoscript-2021-08-27-10:12:14.log.bz2
Memory	512 490 425

For details, please contact louberger

Aug 27 '21 14:08 LabN-CI

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 607f0186
Date	08/27/2021
Start	11:16:04
Finish	11:42:25
Run-Time	26:21
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-27-11:16:04.txt
Log	autoscript-2021-08-27-11:17:16.log.bz2
Memory	490 514 425

For details, please contact louberger

Aug 27 '21 15:08 LabN-CI

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21429/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-15746/interface.c:65:
< WARNING: Missing a blank line after declarations
< #3856: FILE: /tmp/f1-15746/interface.c:3856:
< WARNING: line over 80 characters
< #4245: FILE: /tmp/f1-15746/interface.c:4245:

Aug 27 '21 17:08 NetDEF-CI

Continuous Integration Result: FAILED

See below for issues. CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21431/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Failed

Topotests debian 10 amd64 part 9: Failed (click for details)

Topology Test Results are at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-TOPO9DEB10AMD64-21431/test

Topology Tests failed for Topotests debian 10 amd64 part 9:

2021-08-27 15:53:38,458 ERROR: assert failed at "test_ospf_asbr_summary_topo1/test_ospf_type5_summary_tc48_p0": Testcase test_ospf_type5_summary_tc48_p0 : FailedError: Summary missing in OSPF DB
assert '[DUT: r0] OSPF summary 11.0.0.0/8 : External route count is 0, Expected is 5' is True
2021-08-27 15:57:34,682 WARNING: vtysh_cmd: r0: failed to convert json output: : No JSON object could be decoded
2021-08-27 15:57:57,177 WARNING: vtysh_cmd: r1: failed to convert json output: : No JSON object could be decoded
2021-08-27 16:03:46,731 ERROR: r0: bgpd left a dead pidfile (pid=1985)
2021-08-27 16:08:37,526 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf hello-interval 65536 


2021-08-27 16:08:56,949 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf dead-interval 65536

see full log at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21431/artifact/TOPO9DEB10AMD64/ErrorLog/log_topotests.txt

Topotests Ubuntu 18.04 amd64 part 9: Failed (click for details)

Topology Test Results are at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-TOPO9U18AMD64-21431/test

Topology Tests failed for Topotests Ubuntu 18.04 amd64 part 9:

2021-08-27 15:58:00,500 WARNING: vtysh_cmd: r0: failed to convert json output: : No JSON object could be decoded
2021-08-27 15:58:23,216 WARNING: vtysh_cmd: r1: failed to convert json output: : No JSON object could be decoded
2021-08-27 16:02:07,901 ERROR: r3: bgpd left a dead pidfile (pid=8293)
2021-08-27 16:09:26,343 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf hello-interval 65536 


2021-08-27 16:09:45,305 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf dead-interval 65536 


2021-08-27 16:40:45,365 ERROR: assert failed at "test_ospfv3_asbr_summary_topo1/test_ospfv3_type5_summary_tc46_p0": Testcase test_ospfv3_type5_summary_tc46_p0 : Failed 
   Error: Routes still present in OSPF RIB True
assert True is not True
2021-08-27 16:48:10,528 ERROR: h1: zebra left a dead pidfile (pid=30266)

see full log at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21431/artifact/TOPO9U18AMD64/ErrorLog/log_topotests.txt

Successful on other platforms/tests

Topotests debian 10 amd64 part 3
Addresssanitizer topotests part 1
Topotests debian 10 amd64 part 8
IPv6 protocols on Ubuntu 18.04
Topotests Ubuntu 18.04 amd64 part 3
Topotests Ubuntu 18.04 amd64 part 5
Topotests Ubuntu 18.04 arm8 part 8
Topotests Ubuntu 18.04 amd64 part 4
IPv4 protocols on Ubuntu 18.04
Topotests Ubuntu 18.04 arm8 part 6
Topotests Ubuntu 18.04 arm8 part 1
Addresssanitizer topotests part 8
Addresssanitizer topotests part 3
Debian 10 deb pkg check
Topotests Ubuntu 18.04 amd64 part 7
Topotests Ubuntu 18.04 arm8 part 7
Topotests debian 10 amd64 part 7
Topotests Ubuntu 18.04 arm8 part 2
Addresssanitizer topotests part 6
IPv4 ldp protocol on Ubuntu 18.04
Ubuntu 20.04 deb pkg check
Debian 9 deb pkg check
Topotests Ubuntu 18.04 i386 part 0
Topotests Ubuntu 18.04 i386 part 5
Topotests Ubuntu 18.04 arm8 part 9
Topotests Ubuntu 18.04 arm8 part 4
CentOS 7 rpm pkg check
Topotests Ubuntu 18.04 amd64 part 8
Addresssanitizer topotests part 2
Topotests Ubuntu 18.04 i386 part 3
Topotests Ubuntu 18.04 arm8 part 3
Topotests debian 10 amd64 part 5
Fedora 29 rpm pkg check
Topotests Ubuntu 18.04 i386 part 2
Topotests Ubuntu 18.04 i386 part 7
Topotests debian 10 amd64 part 1
Topotests Ubuntu 18.04 i386 part 8
Addresssanitizer topotests part 4
Addresssanitizer topotests part 7
Topotests debian 10 amd64 part 0
Addresssanitizer topotests part 9
Topotests debian 10 amd64 part 6
Topotests Ubuntu 18.04 amd64 part 2
Topotests Ubuntu 18.04 amd64 part 0
Addresssanitizer topotests part 5
Topotests Ubuntu 18.04 i386 part 4
Ubuntu 16.04 deb pkg check
Topotests Ubuntu 18.04 i386 part 6
Topotests Ubuntu 18.04 i386 part 9
Topotests Ubuntu 18.04 arm8 part 0
Topotests Ubuntu 18.04 amd64 part 6
Topotests debian 10 amd64 part 2
Topotests Ubuntu 18.04 i386 part 1
Topotests Ubuntu 18.04 arm8 part 5
Ubuntu 18.04 deb pkg check
Addresssanitizer topotests part 0
Topotests Ubuntu 18.04 amd64 part 1
Topotests debian 10 amd64 part 4
Static analyzer (clang)

Warnings Generated during build:

Checkout code: Successful with additional warnings

Topotests debian 10 amd64 part 9: Failed (click for details)

Topology Test Results are at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-TOPO9DEB10AMD64-21431/test

Topology Tests failed for Topotests debian 10 amd64 part 9:

2021-08-27 15:53:38,458 ERROR: assert failed at "test_ospf_asbr_summary_topo1/test_ospf_type5_summary_tc48_p0": Testcase test_ospf_type5_summary_tc48_p0 : FailedError: Summary missing in OSPF DB
assert '[DUT: r0] OSPF summary 11.0.0.0/8 : External route count is 0, Expected is 5' is True
2021-08-27 15:57:34,682 WARNING: vtysh_cmd: r0: failed to convert json output: : No JSON object could be decoded
2021-08-27 15:57:57,177 WARNING: vtysh_cmd: r1: failed to convert json output: : No JSON object could be decoded
2021-08-27 16:03:46,731 ERROR: r0: bgpd left a dead pidfile (pid=1985)
2021-08-27 16:08:37,526 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf hello-interval 65536 


2021-08-27 16:08:56,949 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9DEB10AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf dead-interval 65536

see full log at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21431/artifact/TOPO9DEB10AMD64/ErrorLog/log_topotests.txt

Topotests Ubuntu 18.04 amd64 part 9: Failed (click for details)

Topology Test Results are at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-TOPO9U18AMD64-21431/test

Topology Tests failed for Topotests Ubuntu 18.04 amd64 part 9:

2021-08-27 15:58:00,500 WARNING: vtysh_cmd: r0: failed to convert json output: : No JSON object could be decoded
2021-08-27 15:58:23,216 WARNING: vtysh_cmd: r1: failed to convert json output: : No JSON object could be decoded
2021-08-27 16:02:07,901 ERROR: r3: bgpd left a dead pidfile (pid=8293)
2021-08-27 16:09:26,343 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf hello-interval 65536 


2021-08-27 16:09:45,305 ERROR: Traceback (most recent call last):
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 1908, in create_interfaces_cfg
    tgen, c_router, interface_data, "interface_config", build=build
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 360, in create_common_configuration
    load_config_to_router(tgen, router)
  File "/root/bamboo-agent-home/xml-data/build-dir/FRR-FRRPULLREQ-TOPO9U18AMD64/topotests/lib/common_config.py", line 618, in load_config_to_router
    raise InvalidCLIError("%s" % output)
InvalidCLIError: line 3: % Unknown command[16]: ip ospf dead-interval 65536 


2021-08-27 16:40:45,365 ERROR: assert failed at "test_ospfv3_asbr_summary_topo1/test_ospfv3_type5_summary_tc46_p0": Testcase test_ospfv3_type5_summary_tc46_p0 : Failed 
   Error: Routes still present in OSPF RIB True
assert True is not True
2021-08-27 16:48:10,528 ERROR: h1: zebra left a dead pidfile (pid=30266)

see full log at https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21431/artifact/TOPO9U18AMD64/ErrorLog/log_topotests.txt

Report for interface.c | 4 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-11029/interface.c:65:
< WARNING: line over 80 characters
< #4247: FILE: /tmp/f1-11029/interface.c:4247:

Aug 27 '21 18:08 NetDEF-CI

ci.rerun

Aug 28 '21 14:08 pguibert6WIND

ci:rerun

Aug 28 '21 19:08 pguibert6WIND

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21446/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 4 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-14203/interface.c:65:
< WARNING: line over 80 characters
< #4247: FILE: /tmp/f1-14203/interface.c:4247:

Aug 28 '21 22:08 NetDEF-CI

Documentation changes?

Aug 29 '21 08:08 ton31337

@polychaeta rereview

Aug 30 '21 02:08 qlyoung

I recall a discussion with Donald, where I was questioning whether configure mpls sysctl on vty was ok , could be accepted on upstream. So this is the implem 1 I propose. I think of an other implem: automatic mode, where mpls flag would be set automatically based on the routes detected on zebra. With some guidance, I could probably implem that automatic mode.

Aug 30 '21 10:08 pguibert6WIND

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 b6b18524
Date	08/30/2021
Start	06:31:02
Finish	06:57:27
Run-Time	26:25
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-30-06:31:02.txt
Log	autoscript-2021-08-30-06:32:20.log.bz2
Memory	513 531 420

For details, please contact louberger

Aug 30 '21 10:08 LabN-CI

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 ee59c75b
Date	08/30/2021
Start	07:01:03
Finish	07:27:23
Run-Time	26:20
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-30-07:01:03.txt
Log	autoscript-2021-08-30-07:02:20.log.bz2
Memory	500 512 424

For details, please contact louberger

Aug 30 '21 11:08 LabN-CI

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 d9aa0a57
Date	08/30/2021
Start	08:26:01
Finish	08:52:18
Run-Time	26:17
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-30-08:26:01.txt
Log	autoscript-2021-08-30-08:27:13.log.bz2
Memory	514 450 417

For details, please contact louberger

Aug 30 '21 12:08 LabN-CI

@qlyoung, what Donald does is the netlink part of configuring MPLS flag. I think this piece of code can be brought in for now, then later, the config hooks will be mapped to netlink api.

Aug 30 '21 13:08 pguibert6WIND

Continuous Integration Result: FAILED

Test incomplete. See below for issues. CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21459/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Incomplete

Addresssanitizer topotests part 8: Incomplete

(check logs for details)

Successful on other platforms/tests

Addresssanitizer topotests part 6
Topotests debian 10 amd64 part 2
Ubuntu 16.04 deb pkg check
Topotests debian 10 amd64 part 7
Debian 10 deb pkg check
Topotests Ubuntu 18.04 i386 part 6
Topotests Ubuntu 18.04 amd64 part 2
Topotests Ubuntu 18.04 i386 part 1
Topotests Ubuntu 18.04 arm8 part 8
Debian 9 deb pkg check
Topotests Ubuntu 18.04 amd64 part 6
Ubuntu 18.04 deb pkg check
Topotests debian 10 amd64 part 3
Ubuntu 20.04 deb pkg check
Topotests Ubuntu 18.04 amd64 part 1
Topotests Ubuntu 18.04 i386 part 5
Addresssanitizer topotests part 3
Topotests Ubuntu 18.04 amd64 part 8
Addresssanitizer topotests part 2
Topotests Ubuntu 18.04 i386 part 8
Topotests debian 10 amd64 part 0
Topotests Ubuntu 18.04 i386 part 3
Topotests debian 10 amd64 part 1
Topotests Ubuntu 18.04 arm8 part 7
Topotests Ubuntu 18.04 arm8 part 2
Addresssanitizer topotests part 9
Topotests Ubuntu 18.04 arm8 part 9
Topotests Ubuntu 18.04 i386 part 4
Addresssanitizer topotests part 7
Topotests Ubuntu 18.04 amd64 part 7
Topotests Ubuntu 18.04 i386 part 9
Topotests Ubuntu 18.04 arm8 part 0
Fedora 29 rpm pkg check
IPv4 ldp protocol on Ubuntu 18.04
Topotests Ubuntu 18.04 arm8 part 5
Topotests debian 10 amd64 part 4
Addresssanitizer topotests part 0
Addresssanitizer topotests part 5
Static analyzer (clang)
Topotests Ubuntu 18.04 arm8 part 4
Topotests debian 10 amd64 part 9
Topotests Ubuntu 18.04 i386 part 0
IPv6 protocols on Ubuntu 18.04
Addresssanitizer topotests part 1
CentOS 7 rpm pkg check
Topotests debian 10 amd64 part 8
Topotests Ubuntu 18.04 amd64 part 3
Topotests Ubuntu 18.04 amd64 part 9
Topotests Ubuntu 18.04 amd64 part 5
Topotests Ubuntu 18.04 arm8 part 3
Topotests debian 10 amd64 part 5
IPv4 protocols on Ubuntu 18.04
Topotests Ubuntu 18.04 arm8 part 6
Topotests Ubuntu 18.04 i386 part 2
Topotests Ubuntu 18.04 arm8 part 1
Topotests Ubuntu 18.04 i386 part 7
Topotests debian 10 amd64 part 6
Addresssanitizer topotests part 4
Topotests Ubuntu 18.04 amd64 part 0
Topotests Ubuntu 18.04 amd64 part 4

Aug 30 '21 13:08 NetDEF-CI

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21460/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-16664/interface.c:65:
< WARNING: space prohibited between function name and open parenthesis '('
< #3773: FILE: /tmp/f1-16664/interface.c:3773:
< WARNING: line over 80 characters
< #4242: FILE: /tmp/f1-16664/interface.c:4242:

Aug 30 '21 13:08 NetDEF-CI

Continuous Integration Result: FAILED

See below for issues. CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21461/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Failed

Topotests Ubuntu 18.04 arm8 part 4: Failed (click for details)

Topotests Ubuntu 18.04 arm8 part 4: No useful log found

Successful on other platforms/tests

Debian 10 deb pkg check
Topotests Ubuntu 18.04 arm8 part 2
Ubuntu 16.04 deb pkg check
Topotests debian 10 amd64 part 7
Topotests Ubuntu 18.04 amd64 part 2
Topotests Ubuntu 18.04 i386 part 6
Topotests debian 10 amd64 part 2
Topotests Ubuntu 18.04 arm8 part 8
Topotests Ubuntu 18.04 i386 part 1
Addresssanitizer topotests part 6
Topotests Ubuntu 18.04 amd64 part 6
Ubuntu 18.04 deb pkg check
Ubuntu 20.04 deb pkg check
Debian 9 deb pkg check
Topotests Ubuntu 18.04 amd64 part 1
Addresssanitizer topotests part 3
Topotests debian 10 amd64 part 3
Topotests Ubuntu 18.04 amd64 part 8
Addresssanitizer topotests part 2
Topotests debian 10 amd64 part 0
Topotests Ubuntu 18.04 i386 part 8
Topotests debian 10 amd64 part 1
Topotests Ubuntu 18.04 i386 part 3
Addresssanitizer topotests part 9
Topotests Ubuntu 18.04 arm8 part 7
Topotests Ubuntu 18.04 amd64 part 7
Topotests Ubuntu 18.04 amd64 part 0
Addresssanitizer topotests part 5
Addresssanitizer topotests part 7
Topotests Ubuntu 18.04 i386 part 9
Topotests Ubuntu 18.04 i386 part 4
Topotests Ubuntu 18.04 arm8 part 0
Topotests Ubuntu 18.04 arm8 part 5
Addresssanitizer topotests part 0
IPv4 ldp protocol on Ubuntu 18.04
Topotests debian 10 amd64 part 4
Static analyzer (clang)
Topotests Ubuntu 18.04 arm8 part 9
Topotests Ubuntu 18.04 i386 part 0
Topotests debian 10 amd64 part 9
Topotests Ubuntu 18.04 i386 part 5
IPv6 protocols on Ubuntu 18.04
CentOS 7 rpm pkg check
Addresssanitizer topotests part 1
Topotests debian 10 amd64 part 8
Topotests Ubuntu 18.04 amd64 part 3
Topotests Ubuntu 18.04 amd64 part 9
Topotests Ubuntu 18.04 amd64 part 5
Fedora 29 rpm pkg check
Topotests Ubuntu 18.04 arm8 part 3
Addresssanitizer topotests part 8
Topotests Ubuntu 18.04 i386 part 2
Topotests Ubuntu 18.04 amd64 part 4
Topotests debian 10 amd64 part 5
Topotests Ubuntu 18.04 i386 part 7
Topotests Ubuntu 18.04 arm8 part 6
IPv4 protocols on Ubuntu 18.04
Addresssanitizer topotests part 4
Topotests Ubuntu 18.04 arm8 part 1
Topotests debian 10 amd64 part 6

Warnings Generated during build:

Checkout code: Successful with additional warnings

Topotests Ubuntu 18.04 arm8 part 4: Failed (click for details)

Topotests Ubuntu 18.04 arm8 part 4: No useful log found

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-26331/interface.c:65:
< WARNING: space prohibited between function name and open parenthesis '('
< #3773: FILE: /tmp/f1-26331/interface.c:3773:
< WARNING: line over 80 characters
< #4242: FILE: /tmp/f1-26331/interface.c:4242:

Aug 30 '21 14:08 NetDEF-CI

Outdated results 💚

Basic BGPD CI results: SUCCESS, 0 tests failed

_	_
Result	SUCCESS git merge/9505 2bdccfa7
Date	08/30/2021
Start	09:47:22
Finish	10:13:41
Run-Time	26:19
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-08-30-09:47:22.txt
Log	autoscript-2021-08-30-09:48:42.log.bz2
Memory	487 515 426

For details, please contact louberger

Aug 30 '21 14:08 LabN-CI

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21465/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-21476/interface.c:65:
< WARNING: space prohibited between function name and open parenthesis '('
< #3773: FILE: /tmp/f1-21476/interface.c:3773:
< WARNING: line over 80 characters
< #4242: FILE: /tmp/f1-21476/interface.c:4242:

Aug 30 '21 15:08 NetDEF-CI

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21466/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-31769/interface.c:65:
< WARNING: space prohibited between function name and open parenthesis '('
< #3775: FILE: /tmp/f1-31769/interface.c:3775:
< WARNING: line over 80 characters
< #4244: FILE: /tmp/f1-31769/interface.c:4244:

Aug 30 '21 15:08 NetDEF-CI

Docs are missing

I updated doc/../zebra.rst file.

Sep 03 '21 14:09 pguibert6WIND

💚 Basic BGPD CI results: SUCCESS, 0 tests failed

Results table

_	_
Result	SUCCESS git merge/9505 cca9940d
Date	09/03/2021
Start	11:35:19
Finish	12:01:27
Run-Time	26:08
Total	1813
Pass	1813
Fail	0
Valgrind-Errors	0
Valgrind-Loss	0
Details	vncregress-2021-09-03-11:35:19.txt
Log	autoscript-2021-09-03-11:36:28.log.bz2
Memory	513 463 426

For details, please contact louberger

Sep 03 '21 16:09 LabN-CI

Continuous Integration Result: SUCCESSFUL

Congratulations, this patch passed basic tests

Tested-by: NetDEF / OpenSourceRouting.org CI System

CI System Testrun URL: https://ci1.netdef.org/browse/FRR-FRRPULLREQ-21583/

This is a comment from an automated CI system. For questions and feedback in regards to this CI system, please feel free to email Martin Winter - mwinter (at) opensourcerouting.org.

Warnings Generated during build:

Checkout code: Successful with additional warnings

Report for interface.c | 6 issues
===============================================
< WARNING: externs should be avoided in .c files
< #65: FILE: /tmp/f1-16508/interface.c:65:
< WARNING: space prohibited between function name and open parenthesis '('
< #3775: FILE: /tmp/f1-16508/interface.c:3775:
< WARNING: line over 80 characters
< #4244: FILE: /tmp/f1-16508/interface.c:4244:

Sep 03 '21 18:09 NetDEF-CI

@frrbot rereview

Sep 14 '21 15:09 qlyoung

This PR is stale because it has been open 180 days with no activity. Comment or remove the autoclose label in order to avoid having this PR closed.

Jul 09 '22 02:07 github-actions[bot]

This pull request has conflicts, please resolve those before we can evaluate the pull request.

Oct 13 '22 13:10 github-actions[bot]

already merged by an other pull request

May 23 '23 06:05 pguibert6WIND

zebra: add mpls configuration knob per interface

Basic BGPD CI results: SUCCESS, 0 tests failed

Basic BGPD CI results: SUCCESS, 0 tests failed

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build:

Continuous Integration Result: FAILED

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Failed

Warnings Generated during build:

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build:

Basic BGPD CI results: SUCCESS, 0 tests failed

Basic BGPD CI results: SUCCESS, 0 tests failed

Basic BGPD CI results: SUCCESS, 0 tests failed

Continuous Integration Result: FAILED

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Incomplete

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build:

Continuous Integration Result: FAILED

Get source / Pull Request: Successful

Building Stage: Successful

Basic Tests: Failed

Warnings Generated during build:

Basic BGPD CI results: SUCCESS, 0 tests failed

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build:

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build:

💚 Basic BGPD CI results: SUCCESS, 0 tests failed

Continuous Integration Result: SUCCESSFUL

Warnings Generated during build: