dvbsdr
dvbsdr copied to clipboard
F5OEO
DVB transmit and receive
Hi, The setup is Jetson Nano with Portsdown Control and Lime Mini (all up-to-date) and Minitiouner Rx PiCam and USB Mic on the Jetson. I'm getting good results at 70cm...
Dear Evariste, after several try giving up with Jetson. I've re-installed SO for three times, formatting the card, and restarting from a fresh installation. The system won't run, it starts,...
Latest jetson nano build is not recognised by detect_platform.sh Change "jetson-nano" to "Jetson" to resolve.
It seems there is an error in the nanoencode.sh gst-launch-1.0 -q nvarguscamerasrc ! "video/x-raw(memory:NVMM),width=768, height=432, Picamera asked resolution is fixed to 768*432
According to Nvidia documentation parameter peakbitrate is not necessary when omxh265 control rate parameter is not vbr (Value 1) omxh265enc control-rate=2 bitrate=$VIDEOBITRATE peak-bitrate=$VIDEOPEAKBITRATE
Hi, I am having trouble compiling csdr on the nano jetson. I get the following errors, But not sure if I should be posting it here or not. Thanks. MikeK...
Seems to be a problem with Jetson codec not refreshing images, even at high bandwidths leaving ghosts. This was not there with the higher latency.