F5OEO
Nice . As per readme, Pi B is partially supported. Need to investigate (not priority) or you can invest in a low cost Pizero !
Can you try with latest v2 version. There was a conflict with Wifi but could be the same issue in PIB with ethernet.
Not yet on all command lines
OpenVG is depreciated since PI4. GUI is not supported anymore.
See https://github.com/F5OEO/rpitx/blob/7339faad4b2178a92a912c0a1cc09da8b28e7af1/src/chirp/chirp.cpp#L94
Tx power is now set to maximum. Output power depends on frequency. Average power is around 10dbm. There is an way to set the output level, however it is very...
Hi Erich, Well analyzed : GPIO 4 and 20 are available for CLK0 on GPIO header. GPIO 32 and 34 are not accessible. I let them here because it is...
OK, very nice project as I think that a lot of Hams could be interested in this HAT project. Having two bands is a very good idea. As my latest...
Maybe some resolution could not be achieved with HDMI. Rpitx is mainly used in headless (no hdmi monitor). Need to further investigate.
Interesting idea. Have to test : 2 main potential issues : sample rate at 2MSymbols is not reliable with the current version ; Poor dynamic amplitude could disturb OFDM modulation.