ExpressLRS-Hardware icon indicating copy to clipboard operation
ExpressLRS-Hardware copied to clipboard
verified publisher icon ExpressLRS

backpack on DIY 2.4 TX

Open pitts-mo opened this issue 3 years ago • 2 comments

I wish to add a backpack to my 2.4 Ghz DIY TXs based on PCB labeled: 2.4GHz ExpressLRS EBYTE v1.0

Please verify my understanding and I will be happy to take images of my install and assist adding documentation. https://github.com/ExpressLRS/ExpressLRS-Hardware/blob/master/PCB/2400MHz/TX_SX1280/README.md

Parts needed ?: 1x ESP-01F ESP8285 https://www.aliexpress.com/item/2255801122884432.html 1x? antenna (not etched into PCB?, use 30mm wire or antenna included with ESP) 1x? C1 value? is this needed to keep 3.3v stable? 1x? boot button needed on IO0?

Build detail ?: -Can initial flash of ESP-01F be performed after install? -Orient ESP-01F so that the corner cutout of RF shield aligns with corner cutout of silkscreen.

pitts-mo avatar Jun 05 '22 15:06 pitts-mo

Hmm, just noticed, Is there a compatible backpack target?

DUPLEX TX Backpack?

pitts-mo avatar Jun 05 '22 16:06 pitts-mo

initial attempt to add detail in PR #41 Definitely needs the images scaled.

pitts-mo avatar Jun 11 '22 20:06 pitts-mo