EvansPM

I came to the same conclusion. Probably if [disconnect ](https://github.com/once10301/wifi/pull/16) feature exist would help. In my case i check if wifi not enabled if not activate it then connect to...

Based on the datasheet https://cdn-shop.adafruit.com/product-files/3179/sx1276_77_78_79.pdf, _LoRa.idle()_ should use around 1.5uA, by the way i do not know what mean "RC oscillator" which should be enabled. And I'm not trying to...

You are right, sorry for my lack of clarity. I just wanted to set the context, the final goal of this project. But at the moment I'm just trying to...

I tried right now with a separated source for the Lora module and i got same value. I tried to sleep the atmega (about 200uA) yesterday to see if it...

After reading again the doc, what i understand is actually _LoRa.idle()_ is not for idle mode but for standby mode.  So my value are correct and for my need...

Thank you for the link of that article. If i understood CAD == check before send, while saying CAD allow saving power, they do not provide values. Anyway the CAD...

I'm wondering too how to use it and what expecting. ```python image_to_gcode.py -o input img/image.jpg``` And you should get corresponding gcode? :-) Anyway, I think the code is obsolete, many...

Not necessary fill it but use one line like in the original image, i was exploring "[Skeletonization](https://medium.com/analytics-vidhya/skeletonization-in-python-using-opencv-b7fa16867331)" which can make good job but when come back to your SvgToGcode expecting...

yes a straight lines.