[Bug] Display manager

[LimitlessGreen]

I'm a bit confused about the display manager

This is my configuration:

This is how GeoPix showing it:

But: The main window is on the lower res screen, not the higher res.

Also: If I'm going into Span mode it's looking like this (on the high-res one):

Strange: If I'm in Span mode and changing some task bar settings, the window pops into full screen on the high-res monitor.

[EnviralDesign]

Ah yes - this feels reminiscent of the issue I had a while back I thought I fixed. in your config, which of the monitors is the "primary" one? I have a very similar monitor setup, so I feel I should be able to reproduce this.

Also, do you have any zoom != 100% on any of the monitors?

[LimitlessGreen]

My primary one is 1920x1080. And yes, I have a scaling of 125%. I'll test on 100% tomorrow.

[EnviralDesign]

is scaling 125% for both or just one or the other, and if so which one? I know for a fact that the scaling is a challenge in TD, but this might be related to the primary/secondary order etc. will be able to more closely recreate your setup with zooms for each display's DPI and the primary you just mentioned, soon.

[LimitlessGreen]

Sorry for the delay. University started again :)

I don't have the 2 display setup at the moment, but I think both were at 125%. The scaling is a thing on its own. On a single monitor with 125% in Span mode, the window is 25% bigger than the screen.

[EnviralDesign]

great thanks for this clarification.