STL and BOM duplicate and misnamed files

[gitgotgit]

Issue 1: These files can be found in 2 locations on GitHub, and the BOM consequently lists them twice even though only one copy is required: [a]_BTT_MMB_Box_Lid.stl [a]_BTT_MMB_support_arm_bottom.stl

Located in: ERCF_v2 / STLs / Supports / BTT_MMB / Buffermount_for_ERCT and also in: ERCF_v2 / Recommended_Options / ERCT_Buffer / Stls / Support Arm

Issue 2: In addition "[a]_BTT_MMB_Box_Lid.stl" is incorrectly called "[a]_BTT_MMB_case_top.stl" in the BOM

Issue 3: Tag plates ERCF_v2 / Recommended_Options / ERCT_Buffer / Stls / Filament_Blocks / Tag_Plates These files should be multimaterial [mm] In addition, the accent colour is inverted from the CAD design (CAD has the numbers in accent, file naming gives the background in accent), was this deliberate?

[Miriax]

Issue 1: They are indeed duplicated. I think it is a remnant from reorganizing folders, I will double check with the team before deleting.

Issue 2: You're referring to the Printed Parts Tracker, not the BOM, correct? I've fixed the filenames for a few things in the Tracker.

Issue 3: There is a method to print the tag plates on a single-color printer with manual color changes so that you can print them before setting up ERCF. I'll ask the team to find that info and add it to the manual. I do not believe the color inversion was deliberate, I will ask the team.