MTB
MTB copied to clipboard
Energinet-SimTools
Energinets Model Testbench. Automate gridcompliance studies in PSCAD and Powerfactory.
After the projects units are reset series impedance values are entered as R and X, but the MTB enters uk and ploss.
Add case to test voltage and frequency protection settings. Possibly with the trip- and delay-setting as inputs, forcing voltage or frequency just above/below the trip setting to verify it doesn't...
Example projects with the PP-MTB installed for both PSCAD and PF. Use generic models.
Updated path and pathnames in config.ini of the plotter. Updated testcases.xlsx with added tests and update to main tab.
Hi, There is a minor bug in case 42: ION_RfG_Ucontrol_FRTsensitivity-ramp. The RMS voltage does not ramps up as in EMT.
Hello, When trying to run the PSCAD script i tried to use an external client. I ran into 2 issues using this method. The first is that the requirements.txt file...
Hello, When i use the MTB the LVRT case is not being generated correctly, i found that deleting one of the events at 0.15 seconds made it follow the actual...
Hello, I ran into this issue when i was starting to use some custom made cases: ```python #err - Traceback (most recent call last): File "", line 27, in File...
Metadata
Owner
Metadata
Energinets Model Testbench. Automate gridcompliance studies in PSCAD and Powerfactory.