openwrt-zsun
openwrt-zsun copied to clipboard
Emeryth
USB Gadget mode, any success?
Hi guys,
The Hackspace.pl wiki mentions USB gadget mode. I'm interested in trying it out, and was wondering if anyone has managed the steps described, which are:
Port the code
Remove the bootstrap resistor setting USB to host mode
Remove the card reader PCB and rewire the the USB signal pins
Has anyone managed this so far? If so, care to share your findings/code?
I'm also very interested in this feature. If anyone has information on using the Zsun in USB Gadget mode, then please share your findings.
I'm interested, too. I did some googling, and found this: https://marc.info/?a=136188979700002&r=1&w=3 https://patchwork.linux-mips.org/patch/4968/ . Apparently, (unless I'm misreading) the patches were revised multiple times and sent, but they were never approved/pushed upstream... I wonder how much would it cost to (back) port them and push them to upstream + openwrt.
Also, there is a repo in github owned (I guess) by the person that made these patches: https://github.com/neykov/chipidea-openwrt , but it seems to be a bit older than the latest patchset ("Latest commit b4b579b on 28 Feb 2013" vs March 28 show in the linux-mips.org link above).
Digging a bit more... v3 of the patches: https://www.linux-mips.org/archives/linux-mips/2013-04/msg00009.html As plntyk @ #openwrt pointer out, looks like there never was a v4: https://www.google.com/search?q=%22PATCH+v4+*%5D+usb%3A+chipidea%22+%22Neykov%22
USB gadget is working in LEDE trunk (unfortunately it has not been included in the first stable release).
Here's a quick port I made some time ago: https://github.com/Emeryth/source/tree/zsun
Hi @Emeryth,
sorry for the question, does g_ether works without any hardware modifications ?
If yes, I was wondering if it is possible to post some compiled images as I believe g_ether is very useful.
Thank you
I'd like to use that too but using LEDE which ignores my wishes or I just am a victim of pebcak. :-(
So probably I only can impatiently wait for a new LEDE release? Could it be "officially" supported then?
Where is the petition we need to sign? ;-)
I've modded my old-PCB ZSUN by removing the card reader board and headers, then jumped D+ and D- to USB connector, and finally removed G13 resistor (well, the hard way, I yanked it with a pair of tweezers since its too tiny for the iron).
(please ignore my crude soldering job)
On the original OpenWRT image (from here) the PC can detect the presence of an invalid device plugged in, while on an LEDE image (from here) nothing really happens. I haven't got time to compile my own kernel and image so I'd say it could be just a false hope.
The USB gadget driver for AR9331 is not present in OpenWrt or LEDE 17.01.4. You have to compile LEDE trunk with one of the USB gadget modules.
@emeryth thanks mate
I guess hardware-wise I'm good? (Please tell me yes🤞)
Cheers
Yes, it looks that way. Remember that you will need to reduce the size of the LEDE kernel image by disabling some options (or it won't fit in the zsun's kernel partition). There's discussion about it in the thread you posted.