TSynth-Teensy4.1

TSynth-Teensy4.1 copied to clipboard

Loss of voices 10 & 11 (also 9)

2

Voices 10 and 11 are lost and sometimes 9. Difficult to reproduce but occurs enough times to be a concern. Panic and patch changing doesn't solve.

ElectroTechnique

Hallo Tsynt I use the exp envelopes and read AudioProcessorUsageMax() It increases with each note. I can not be reset with AudioProcessorUsageMaxReset(). If I load another patch, the AudioProcessorUsageMax() drops...

rolfdegen

Hallo Tsynth :) Looks like the linker is failing with lots of duplicate symbols. For example step_table: You have defined in data_bandlimit_step.c. But you are also using Audio librar and...

rolfdegen

Feature Request: ability to select screen "type" without uploading different versions of firmware

3

I was thinking about a method of configuring the display during initial boot instead of having to upload different versions of the firmware. There are three buttons below the display:...

worsco

I have a question about Unisono Mode1 in TSynth 4.1. In the old Firmware (Version 2.00 ) you don't use DETUNE for the 1st voice. The Oscillator Frequency for Midi...

rolfdegen