Jamal Bouajjaj

Changed step file properties as requested. Also changed the LED color to blue:  I have recently soldered some RGB LEDs with the footprint I am making the 3d model...

Changed the LED to this:   The main reason is to change the way it was modeled in FreeCad (Now it uses an additive pipe to extrude the legs)....

Any updates on this pull request ?

@Franck78 The footprint that you're referring to is the _LED_D5.0mm-4_RGB_, whereas this PR is for the _LED_D5.0mm-4_RGB_Wide_Pins_ package, in which the pins are spaced at 2.16mm apart (for easier hand-soldering...

Did you add the other res_bands (from 1 to 4)? This could be because it is crashing when it is trying to find the other bands after it finds the...

Could you try updating `pcbdraw` then running your script (ideally from git directly instead of a release). When I downloaded your SVG it looks black, even in Inkscape  Unfortunately...

Hello, I have taken a look at your board file, and have come to the following conclusions so far: - The reason the SOT32 is oriented wrong is because you...

Can confirm this is an issue. Trying to investigate for a bit, but I am not familiar with the lxml library

hello, i'll assign myself to this, as I've created the resistor color code feature. 1. For values

So I have a preliminary version of the 5-band implementation working. It selects a 5 band if the tolerance is