AlphaX
**Is your feature request related to a problem? Please describe.** 60s wait time is good on a cold engine, but usually too much on a warm engine **Would we need...
**Describe the bug** I have a car with an 8chan wired up. If I control the main relay pin (meaning the main relay pin is assigned to Main Relay output),...
Triggers: -dev 2jz simulator? -Mitsubishi 4g92/93/94 cam 29 -mitsubishi 4g63 cam 34 -mitsu 6g72 cam remove them as they are all not in use (i don't know about dev 2jz...
**Describe the bug** I sometimes get sync failure only in cranking, if i get past cranking it syncs **Hardware** - Board: custom paralela [mitsubichalogic.zip](https://github.com/user-attachments/files/16805902/mitsubichalogic.zip) channel 0 : crank channel 1...
**Describe the bug** On two cars with the same crank patterns, and probably the same crank/cam sensors, the one with a Single Tooth cam (modified by us) syncs up noticeably...
**Is your feature request related to a problem? Please describe.** Sensors category is wildly uncategorized. More order would be much appreciated **Would we need new configuration fields?** We need new...
**Is your feature request related to a problem? Please describe.** Widebandd sensors do fail, and when they do they give bad data, which can be very problematic if using closed...
I am trying to use a 4g63 4 tooth cam as CRANK, and using a 4G63 cam MODIFIED to have one window removed as CAM, resulting in a 4+1. I...
**Is your feature request related to a problem? Please describe.** I would like to be able to control nitrous systems from the ECU itself, to be able to compensate fuel/timing...
**Is your feature request related to a problem? Please describe.** Knock in different cylinders reads differently and we need to compensate for this, definitively if we are doing per-cylinder knock...