AlphaX
**Describe the bug** RusEFI already has idle/coasting/power/overrun states built in, why do these need to be configured seperately for Closed Loop fuel? **To Reproduce** Steps to reproduce the behavior: 1....
**Is your feature request related to a problem? Please describe.** There are cars with ITB's that are also turbocharged. These cars are usually tuned on Alpha-N and then MAP compensation...
**Describe the bug** getOutput(boostStatus.output) produces an error, where the "boostatus." Is not mentioned, and says that "output" is not valid **Hardware** - Board: 4chan **To Reproduce** Steps to reproduce the...
**Describe the bug** No matter which you choose, all use 0v=10afr, 5v = 20afr (AEM) **Hardware** rusefi firmware **To Reproduce** Go to sensors pick ego sensor choose valid input channel...
**Describe the bug** There is a trigger sync error, but sync latest ratio looks perfectly fine? At around 5s in log. Custom hardware but help with anything? Shape looks fine...
**Is your feature request related to a problem? Please describe.** I'm always frustrated when I can't get the expected launch control behavior from my ECU. **Would we need new configuration...
**Describe the bug** At high RPM there seems to be a failure to read cam and dies out. Hardware might be a problem but I got a logic analyzer log...
**Is your feature request related to a problem? I'm always frustrated when I want to lower voltage under different conditions but cannot because voltage target is one value **Would we...
**Describe the bug** Alternator PID Output stays at a high value after we're past the target voltage for a while, eventually starts lowering **Hardware** - Board: [4chan revI] - Engine...
**Is your feature request related to a problem? Please describe.** I'm always frustrated when Launch Control can only fully cut ignition at the launch control RPM value, then revive it...