AlphaX

Very related to https://github.com/rusefi/rusefi/issues/3940 I think, as soon as this is implemented I will test

I think this, #3940 and #4283 should all be rolled up into one. Coast -> idle should have a transition period to help coming down to idle, that basically solves...

Is there any way idle duty control can be added to Lua? I'll implement a rough sketch that should be good enough until this is done

I recorded a video of how LinkECU works in terms of this In this video, base idle is 2.3%, and dashpot adder is 0.5%, idle Hold time is 0.5s, and...

Sadly, I don't think this is fixable. Even the best-of-best ECUs always say in the manual RTFM, the program annoys you with RTFM, and no one does RTFM. I think...

Mainline and Dynocom have this On the ECU side, Haltech and MoTeC afaik have this and yep, it's as you say. Usually you need to put the dyno in a...

The test car will soon be driven around the block, and the test car in Canada will also be updated today. If all is well boost will start being tuned...

Test car 1 (Forte) driven around the block, owner reports no random shutdowns, car turns on perfectly Test car 2 (Genesis) driven up to gas station, owner reports YES random...

https://rusefi.com/online/index.php?vehicleName=Guelph+Genesis&user_id=675&sorts[uploadedMsq]=-1&sorts[uploadedLog]=-1 Shows cranking VVT angle for exhaust jumping between positive and negative. Once it stabilizes at 0, it runs perfectly and doesnt fuck up again

But this is while cranking, it doesn't start until angle shows 0. If it stays at 0 on the first spin, it starts right up.