How to trigger backup heater using optional PCB or RS485 protocol

[PeterRiddersholmLauridsen]

Hi all

I hope this is possible on my Panasonic heat pump: :) Is it possible to trigger the backup heater directly using the optional PCB or the CN-CNT port. Thanks in advance.

Best regards Peter

[geduxas]

No, it's backup, it's used by panasonic logic for backup operations.. not main..

[PeterRiddersholmLauridsen]

Thanks for this information.

But is it possible to force this backup heater to start if the right rs485 command is send to the main PCB?

Peter Riddersholm Lauridsen | Software og SGX Cloud ansvarlig

E: @.@.>

www.smartgrid-x.comhttp://www.smartgrid-x.com/

SMARTGRID-X, Skolegade 85, DK - 6700 Esbjerg

[facebook icon] https://www.facebook.com/profile.php?id=100087068707161 [youtube icon] @.***> [linkedin icon] https://www.linkedin.com/company/smartgrid-x/

---

From: geduxas @.> Sent: Monday, June 10, 2024 9:46:43 PM To: Egyras/HeishaMon @.> Cc: Peter R. Lauridsen @.>; Author @.> Subject: Re: [Egyras/HeishaMon] How to trigger backup heater using optional PCB or RS485 protocol (Issue #495)

No, it's backup, it's used by panasonic logic for backup operations.. not main..

— Reply to this email directly, view it on GitHubhttps://github.com/Egyras/HeishaMon/issues/495#issuecomment-2159161513, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDQ2SQJKN2LHCHRHS2XEFATZGX7CHAVCNFSM6AAAAABJC4MNOGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJZGE3DCNJRGM. You are receiving this because you authored the thread.Message ID: @.***>

[github-actions[bot]]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days.