Ed Smallenburg
Ed Smallenburg
I guess it depends on the display. You may use any character you like.
You can set the pins in the config page of the webinterface. Read the documentation, page 19.
Upload the files in the data directory to SPIIFS. run -t uploaden or something like that. See chapter 6 of the V2.0 document
My fault. The result of the update is indeed the V2 version of the radio. To correct this, just use the V1 version with Arduino IDE and upload it to...
[https://github.com/Edzelf/ESP32Radio-V2/tree/main/doc](https://github.com/Edzelf/ESP32Radio-V2/tree/main/doc)
Just swap the data and clock wires. Or the setting of the 2 pins in the config page of the webinterface.
Try to connect to the wifi access point that is available if the radio cannot connect to the network. Then goto 192.168.4.1 and add your ziggo credentials to the config...
You may try to connect a LED (with a 1k resistor in series) from +5 Volt to the DREQ pin. That will give some info.
The Volume and Tone settings are not saved automatically. In the ESP32 version they will be saved automatically. You have to use the "save" button in the config page of...