Ed Smallenburg
Ed Smallenburg
VS1003 does not have all the capabilities, but it seems to work with some modification. I can not test it, because I only have the VS1053. Search for this in...
See issue 100. People reported the inversion of pin 15. You may use a different pin for CS. You may also try to do a software update from the config...
Sorry, I mean pin 5. Maybe you can measure this pin. It should be HIGH most of the time.La Same for pin 16. Did you try the software update?
Try: radiokoeln-live.cast.addradio.de/radiokoeln/live/mp3/high?ar-distributor=f0b7
It does work on the ESP32 version of the radio.
Are you sure you have defined "pin_i2s_spdif" in the config page of the web interface? If you remove the definitions of "pin_enc_clk", "pin_enc_clk" and "pin_enc_clk" from the config page in...
Read [this](https://github.com/Edzelf/ESP32-Radio/blob/master/doc/ESP32-radio%20buiding%20instructions.pdf). See chapter 1.3.
Strange. Looks like the clock frequency of the VS1053 is to low. Could you try a spare VS1053?
The difference between 12.288 and 12.000 explains the 3 percent difference in playing speed. Maybe you can replace the xtal with the right one. This will cost you 10 dollarcent...
Yes, great!