EdgeTX
EdgeTX cannot connect to Mac, v2.11.3
Is there an existing issue for this problem?
- [x] I have searched the existing issues
What part of EdgeTX is the focus of this bug?
Transmitter firmware
Current Behavior
When connecting my TX15 Max to my MacBook pro, M2, Sequoia 15.7.2. I get the error
"The disk you attached was not readable by this computer."
Expected Behavior
I should be able to download/upload the contents of the internal storage, as if it were a mounted drive.
Steps To Reproduce
- plug in usb-c to mac
- plug in usb-c to tx15 max
- get error
Version
2.11.3
Transmitter
Other (Please specify below)
Operating System (OS)
macOS
OS Version
Sequoia 15.7.2
Anything else?
Radiomaster TX15 Max
USB-C to USB-C connection seems to be an issue with quite a few radio/handset models... do you have a USB-C to USB-A adapter/hub you can use with the stock. USB-A to USB-C cable?
On Thu, 13 Nov 2025, 3:22 am Paul Chinetti, @.***> wrote:
pito189 created an issue (EdgeTX/edgetx#6787) https://github.com/EdgeTX/edgetx/issues/6787 Is there an existing issue for this problem?
- I have searched the existing issues
What part of EdgeTX is the focus of this bug?
Transmitter firmware Current Behavior
When connecting my TX15 Max to my MacBook pro, M2, Sequoia 15.7.2. I get the error
"The disk you attached was not readable by this computer." ConnectionError.png (view on web) https://github.com/user-attachments/assets/0720a326-1c31-4e79-94e8-05cc211fd891 Expected Behavior
I should be able to download/upload the contents of the internal storage, as if it were a mounted drive. Steps To Reproduce
- plug in usb-c to mac
- plug in usb-c to tx15 max
- get error
Version
2.11.3 Transmitter
Other (Please specify below) Operating System (OS)
macOS OS Version
Sequoia 15.7.2 Anything else?
Radiomaster TX15 Max
— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx/issues/6787, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ66KNX6FKPOBM77QZITJL34NUFNAVCNFSM6AAAAACL5BJRR6VHI2DSMVQWIX3LMV43ASLTON2WKOZTGYYTOMZYGQYTOMA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
I've tried multiple usb-a to usb-c adapters, still no luck.
The transmitter will connect to a PC, with a usb-c to usb-a cable.
It does work fine on both my Mac mini (m4 pro) or my MacBook Pro (m2 max), both Apple silicon and Sequoia (now Tahoe). I does require using a usb-c to usb-a adapter, then usb-a to usb-c cable. At least 2 other devs are also Mac users and don't have a similar issue.
But mainly, TX15 Max doesn't run on 2.11.x, only 3.0
I couldn't find anything across the internet and Radiomaster didn't have a fix other than to wait for 3.0.
Just wanted to make sure it was on the radar and not assume it would be fixed in 3.0.
Thank you all!
This isn't a programming issue (in my opinion) but rather a hardware issue. Many C-C cables do not have the USB A pins connected, worse many PC C ports do not have these pins connected. These are D+ and D- which are A6 and A7 on the C connector. If the cable doesn't have these pins or if the PC doesn't have these pins on its C connector it will never work (an adapter wont work if the C port on the PC doesn't have D+ and D- input). All USB A ports have D+ and D- data pins. This is why the best bet is always an A port with an A to C cable. You can still have problems with this if you use a charge only A-C but that's pretty rare these days.
