EdgeTX
Different and separate step trim configuration for first 4 channel.
Is there an existing issue for this feature request?
- [x] I have searched the existing issues
Is your feature request related to a problem?
I was wondering if it was possible, like in radios from other manufacturers (eg. Futaba), to have different step fields (Fine, Extra fine, Course, etc.) for each trim on the radio. It will be limited only to 6 trims, but I think that the first 4 trim is sufficient. It is very convenient on turbines by setting the throttle trim step to maximum to have only two steps when the turbine is turned off via trims, as indicated into the turbine manual. Or simply, have different steps for the various surfaces (ailerons, elevators, etc.) Thank you for your attention. Rosario
Describe the solution you'd like
in Mdl->Trims I expect to be able to configure, for each of the 4/6 trims, the pitch and the extended trim sw. Show trim (1 toggle only) could remain common for all trims.
Rearrange the reset and "show trims" to fill 5 lines...
Describe alternatives you've considered
No response
Additional context
No response
