EdgeTX
Support AUX2 Jumper T15
Is there an existing issue for this feature request?
- [X] I have searched the existing issues
Is your feature request related to a problem?
For connecting BLE Telemetry DIY and GPS, as variant
Describe the solution you'd like
Add AUX2 in build action (Serial3 on PB10, PB11 and Serial6 on PG14, PG9), if there are no terrible obstacles.
Describe alternatives you've considered
No alternatives
Additional context
No response
UART3 (the one close to the STM32) is already AUX1 and working. 3.3V on VCC though.
Jumper have asked that this connector stay dedicated to something else.
Maybe it's worth doing something else as one of the Serial AUX connection types (Telemetry Mirror/SBusIN/Jumper something else)?
UART3 (the one close to the STM32) is already AUX1 and working. 3.3V on VCC though.
Disgusting. Low-current LDO won't be able to power the Bluetooth module. However, 5 volts from BEC can probably be found.
The serial 3 is already working, i connect es a bluetooth Module there https://github.com/EdgeTX/edgetx/pull/5445 I think also the other maybe already work because you can select two Aux. But i did Not test it.
Currently i have a normal. Bluetooth Modul on it.
Jumper have asked that this connector stay dedicated to something else.
Jumper hasn't released anything else. Besides, this something else should be supported by the firmware. Maybe open AUX 2 for all users? And when something else is released, add it to the list of usage options.