SD Logs: Value cannot be cleared

[twistedwings]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

Special Functions: SD Logs: Value cannot be cleared (0 = off), min is 0.1

Expected Behavior

Special Functions: SD Logs: Value can be cleared (0 = off),

Steps To Reproduce

1. Modell Settings
2. Special Functions
3. Create new
4. SD Logs
5. Set value to 0

Version

2.10.3

Transmitter

RadioMaster TX16S / TX16SMK2

Operating System (OS)

No response

OS Version

No response

Anything else?

No response

[3djc]

You can disable the SF , you can delete it, but a sd log with a 0 sec interval means nothing.

What are you trying to achieve?

[twistedwings]

I want to switch logging off. The manual says: "The value options are 0.0s - 25.5s (Note: 0.0 effectively disables this option)."

In companion I can set a value of 0.

[3djc]

Simply disable the trigger for the sf or the sf itself

[twistedwings]

that's a little bit tricky while flying...

[3djc]

No, simply put the trigger for sd log on a switch or something like this, much easier than changing the value!

[twistedwings]

I have done that. But I want to switch logging on and off. Therefore I have to set the parameter to 0 (for switching off)

That works in companion but not on the radio.

[3djc]

This makes no sense, if L13 is not true, there will be no logs, therefore your second line is useless, your SF15 both start and stop the log based on L13 state

[twistedwings]

OK, than it was a misunderstanding on my part. Sorry, I will close the issue.

[3djc]

I think there is an issue companion (and documentation) side, so please leave open