Edge TX buddy Froze while erasing firmware

[HeavyJohnny]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

While updating the firmware on my TX16s Mk2, Edge TX Buddy Froze at 0% erasing Firmware and bricked my TX. I was able to recover it back to the original firmware using STM32CubeProgrammer but am still having the same problem erasing the firmware both with the chrome version of Buddy and the app. Therefore I am unable to update my firmware. Please Help.

Expected Behavior

I expected my firmware to be upgraded

Steps To Reproduce

see error

Version

2.7.1

Transmitter

RadioMaster TX16S / TX16SMK2

Operating System (OS)

Windows

OS Version

11 pro

Anything else?

No response

[HeavyJohnny]

I was able to get it to work after loading 2.8 and then going forward to the latest firmware

[pfeerick]

Since you could see the STM32 bootloader, the radio was in DFU mode. Were you not able to then flash the radio with EdgeTX Buddy? As if you could flash it with srm32cubeprogrammer, Buddy should have been able to flash it then also.

The version of edgetx running at the time has no bearing on DFU mode - DFU is built-in functionality of the STM32 MCU.

On Sun, 14 Apr 2024, 10:31 pm Kevin Price, @.***> wrote:

I was able to get it to work after loading 2.8 and then going forward to the latest firmware

— Reply to this email directly, view it on GitHub https://github.com/EdgeTX/edgetx/issues/4878#issuecomment-2054034053, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ66KKT7GE6ZNU424LPXX3Y5JZKRAVCNFSM6AAAAABGGDYXHOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJUGAZTIMBVGM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

[github-actions[bot]]

This issue has been closed due to no activity in over four weeks after having been marked as closure pending.