EdgeTX
Preflight Checks: - Setting any switch to type "None" or "Toggle" breaks Preflight Check buttons to the right.
Is there an existing issue for this problem?
- [X] I have searched the existing issues
What part of EdgeTX is the focus of this bug?
Transmitter firmware
Current Behavior
If any hardware switch from SA - SG is set to type "Toggle" or "None" (my SF switch has been changed to a momentary), the default position buttons in model "Preflight Checks" to the right of the "Toggle" or "None" are broken. The switch button just to the right changes to "0" and all others to the right show their switch name but are stuck on the previously set position graphic. They do change color when active and do seem to function as expected, it appears to be cosmetic only. Pressing the "0" button causes some buttons to the right to also change state if they were previously pressed and if you sequentially press the buttons to the right and left others will randomly change.
I am on 2.9.4, I also tried 2.9.3, 2.9.2 and problem remained. Switching to 2.8.5 the issue was resolved. Switching back to 2.9.3 the issue returned.
I did not see any issue in Companion though did not thoroughly test.
If I set my toggle as a "2POS" the problem does not occur.
Expected Behavior
Changing a switch to type "Toggle" should drop it from the Preflight Checks button list only and not effect the remaining buttons.
Steps To Reproduce
Press SYS -> Hardware-> Switches. Change SA (or any switch with other active non-toggle switches after it) to "Toggle" or "None". Return to Model -> Model Setup -> Preflight Checks. SB (or the button after the one you changed) button will now show "0" and all others to the right will be stuck on the previous setting. Pressing may or may not change graphic and pressing the "0" after pressing buttons to the right will then cause other button graphics to change.
Version
2.9.3
Transmitter
RadioMaster TX16S / TX16SMK2
Operating System (OS)
Windows
OS Version
11
