EdgeTX
Assign extra PCB inputs available already in X9-Lite to SG and LS and RS.
Is there an existing issue for this feature request?
- [X] I have searched the existing issues
Is your feature request related to a problem?
See OpenTx Issue #6555: I have updated all my transmitters to Edgetx to have the same operating system on all of them. Waiting in OpenTx that someone works on the additional switches but stale Robot closed that one. Is there any hope to get this working in EdgeTx ?
Describe the solution you'd like
The X9-Lite has 5 switches and a pot. On, the board, provisions have been made for easy diy extension with 2 pots (or switches) and one switch (to switch a 2 pos or toggle).
I would suggest to include these already in the available hardware options on the X9-Lite.
Describe alternatives you've considered
No response
Additional context
https://github.com/opentx/opentx/issues/6555
It should be doable - for the TX12 and TX16 we have support for the extra "unused" ports and it's a matter of configuring what they do. Plus we don't have the storage format issue that existed at the time this issue was mentioned at the time.
Are you in a position where you would be able to test the solution works if someone was to code it without the hardware?
can take some time because I have a job where I am on the road a lot ( only 1 weekend per month at home... )
@pfeerick I do have a X9-lite, so I should be able to test things as well. @r41065 I'd need a picture of the inputs, and pinout if you have.
Just looked up the datasheet (see here)
| Pin | Alternate function | RC function |
|---|---|---|
PD14 |
TIM4_CH3 |
Switch SG |
PC2 |
ADC123_IN12 |
Slider LS |
PC3 |
ADC123_IN13 |
Slider RS |
@r41065 as it seems, PC2 & PC3 can be used as analog inputs, while PD14 could be used as an additional 2-pos switch.
I'm interested in adding 2 momentary buttons (like X9 lite s).... is there any news?
@r41065 right, I think we could easily do it now. Anyone who would be able to test?