Michael Sims

@knutwurst I have taken a portion of the wiki and inserted my proposed VERY SIMPLE addition to the page and put it on my web server for you to review....

@BigFatLee - can you provide a link to your fork? Using the @rjuang fork, when I start a new Arduino project, I get this error, and I cant see any...

@whalemare Do you have a link to a decent tutorial on installing and configuring platformio?

@whalemare Thank you, I'll check it out ... I tried to get it going last week but got a little tripped up with compiling and uploading ... things just weren't...

@OHacks Here are my stock Mega X driver voltage readings: Board: TriGorilla V0.0.2 Board LabelVoltageMisc E10.900Z2 E00.780 Z0.907Z1 Y1.006 X0.917 Readings were taken with a Fluke 17B+ Meter. And all...

If anyone is interested, they can use [this link](https://simtechdata.com/anycubic/) to record their voltage readings, then when they click submit, it will kick out the text that they can then copy...

@OHacks By the way, using the same calculations as you used to set the voltage of the 2208 drivers worked out perfectly for me, except the extruder motor on the...

As a point of interest perhaps for some people, I replaced my drivers with [these 2209's](https://www.amazon.com/dp/B09LCZJV1F), and instead of using the double sided tape that the heat sinks come with,...

> I had the same issue and I also didn't want to use the tape but a heat sink adhesive. So I just removed the heat sinks on the original...

@fvarrui > I'm researching about using [warp](https://github.com/dgiagio/warp) to build portable executables for each platform. It looks good! Warp reminds me of the IBM OS/2 days ... ;-) It looks somewhat...