AnLinux-App
AnLinux-App copied to clipboard
EXALAB
vncserver: command not found
Whenever I try to start the vnc server I get this error
/usr/local/bin/vncserver-start: line 4: vncserver: command not found
I have installed Ubuntu and xfce4 DE.
Hi,
This error usually occur when vncserver does not installed successfully.
Please run the command in Desktop Environment feature and post the screenshots if any error occur.
Regards, EXA Lab
On Thu, Jan 31, 2019, 5:07 AM Dennis <[email protected] wrote:
Whenever I try to start the vnc server I get this error /usr/local/bin/vncserver-start: line 4: vncserver: command not found
I have installed Ubuntu and xfce4 DE.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/EXALAB/AnLinux-App/issues/56, or mute the thread https://github.com/notifications/unsubscribe-auth/Af5mUb4nPgEjyn56musHOcXI1JlchJ5qks5vIgmWgaJpZM4abEDM .
Hi, I have the same error, how can I solve it? I have reinstalled it several times, but always the same error. Thank you.
Please post the screenshots so we could know the situation.
Regards, EXA Lab
On Sat, Feb 2, 2019, 3:36 AM Lexank <[email protected] wrote:
I have the same error, how can I solve it?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/EXALAB/AnLinux-App/issues/56#issuecomment-459841955, or mute the thread https://github.com/notifications/unsubscribe-auth/Af5mUQICFPyjC48cJVUTuW4hCV_elrRsks5vJJcygaJpZM4abEDM .
Hello, I paste here the transcript of the process:
`$ ./start-ubuntu.sh groups: cannot find name for group ID 3003 groups: cannot find name for group ID 9997 groups: cannot find name for group ID 20226 groups: cannot find name for group ID 50226 root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2019-02-02 12:42:12-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1299 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.1’
de-apt-xfce4.sh.1 100%[======================>] 1.27K --.-KB/s in 0s
2019-02-02 12:42:13 (27.0 MB/s) - ‘de-apt-xfce4.sh.1’ saved [1299/1299]
Hit:1 http://ports.ubuntu.com/ubuntu-ports bionic InRelease Reading package lists... Done E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. --2019-02-02 12:42:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 110 [text/plain] Saving to: ‘/root/.vnc/xstartup’
xstartup 100%[======================>] 110 --.-KB/s in 0s
2019-02-02 12:42:20 (1.77 MB/s) - ‘/root/.vnc/xstartup’ saved [110/110]
--2019-02-02 12:42:20-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start’
vncserver-start 100%[======================>] 98 --.-KB/s in 0s
2019-02-02 12:42:20 (1.33 MB/s) - ‘/usr/local/bin/vncserver-start’ saved [98/98]
--2019-02-02 12:42:20-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop’
vncserver-stop 100%[======================>] 100 --.-KB/s in 0s
2019-02-02 12:42:21 (1.59 MB/s) - ‘/usr/local/bin/vncserver-stop’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found root@localhost:~#`
Hope you can help me, thank you. My device is Huawei MediaPad M5 lite (BAH2-W19), Android 8.0.
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
Just follow what it says, run: dpkg --configure -a to fix it and rerun the command.
Sorry for the inconvenient, but I had already done it before and didn't solve the problem:
`root@localhost:~# dpkg --configure -a Setting up libpython3-stdlib:arm64 (3.6.5-3) ... Setting up cpp (4:7.3.0-3ubuntu2) ... Setting up libgstreamer-plugins-base1.0-0:arm64 (1.14.0-2ubuntu1) ... Setting up libfontconfig1:arm64 (2.12.6-0ubuntu2) ... Setting up libsm6:arm64 (2:1.2.2-1) ... Setting up python3 (3.6.5-3) ... running python rtupdate hooks for python3.6... running python post-rtupdate hooks for python3.6... Setting up gvfs-common (1.36.1-0ubuntu1) ... Setting up libdrm-amdgpu1:arm64 (2.4.91-2) ... Setting up libdrm-freedreno1:arm64 (2.4.91-2) ... Processing triggers for dictionaries-common (1.27.2) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline dictionaries-common: wordlists
Possible debconf database corruption
The setting for "dictionaries-common/default-wordlist" is missing, but packages providing candidates are installed: "miscfiles".
This may be due to corruption in the debconf database. See "/usr/share/doc/dictionaries-common/README.problems" on "Debconf database corruption".
In this case, running "/usr/share/debconf/fix_db.pl" can help to put the debconf database in a consistent state.
Some questions are likely to be asked after this message in order to leave the dictionaries system in a (provisionally) working state.
update-default-wordlist: Trying to get a default value from "english (Webster's Second International English wordlist)" dictionaries-common: wordlists
Please indicate which wordlist the "/usr/share/dict/words" symlink should point to. This will provide a simple list of dictionary words for basic spell-checking and word searches. Use "Manual symlink setting" if you want to handle this symlink yourself.
The default wordlist can be changed at any time by running "select-default-wordlist".
- english (Webster's Second International English wordlist)
- Manual symlink setting System default wordlist: 1
Setting up python3-idna (2.6-1) ... Setting up libgbm1:arm64 (18.0.0~rc5-1ubuntu1) ... Setting up python3-six (1.11.0-2) ... Setting up libinput10:arm64 (1.10.4-1) ... Setting up python3-certifi (2018.1.18-2) ... Setting up xfonts-utils (1:7.7+6) ... Setting up python3-pkg-resources (39.0.1-2) ... Setting up python3-gi (3.26.1-2) ... Setting up lsb-release (9.20170808ubuntu1) ... Setting up perl (5.26.1-6) ... Setting up python3-problem-report (2.20.9-0ubuntu7) ... Setting up libpoppler73:arm64 (0.62.0-2ubuntu2) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Processing triggers for libc-bin (2.27-3ubuntu1) ... Setting up python3-chardet (3.0.4-1) ... Setting up gvfs-libs:arm64 (1.36.1-0ubuntu1) ... Setting up liburi-perl (1.73-1) ... Setting up python3-systemd (234-1build1) ... Setting up libdata-dump-perl (1.23-1) ... Processing triggers for systemd (237-3ubuntu10) ... Setting up python3-httplib2 (0.9.2+dfsg-1) ... Setting up man-db (2.8.3-2) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Building database of manual pages ... ./tracee/event.c:517: int handle_tracee_event(Tracee *, int): assertion "!IS_IN_SYSENTER(tracee)" failed proot warning: signal 6 received from process 24665 $ ./start-ubuntu.sh groups: cannot find name for group ID 3003 groups: cannot find name for group ID 9997 groups: cannot find name for group ID 20226 groups: cannot find name for group ID 50226 root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2019-02-03 00:45:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1299 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.3’
de-apt-xfce4.sh.3 100%[======================>] 1.27K --.-KB/s in 0s
2019-02-03 00:45:19 (40.3 MB/s) - ‘de-apt-xfce4.sh.3’ saved [1299/1299]
Hit:1 http://ports.ubuntu.com/ubuntu-ports bionic InRelease Reading package lists... Done E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. mkdir: cannot create directory ‘/root/.vnc’: File exists --2019-02-03 00:45:25-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 110 [text/plain] Saving to: ‘/root/.vnc/xstartup.2’
xstartup.2 100%[======================>] 110 --.-KB/s in 0s
2019-02-03 00:45:25 (2.80 MB/s) - ‘/root/.vnc/xstartup.2’ saved [110/110]
--2019-02-03 00:45:25-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start.2’
vncserver-start.2 100%[======================>] 98 --.-KB/s in 0s
2019-02-03 00:45:25 (3.32 MB/s) - ‘/usr/local/bin/vncserver-start.2’ saved [98/98]
--2019-02-03 00:45:25-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.132.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.132.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop.2’
vncserver-stop.2 100%[======================>] 100 --.-KB/s in 0s
2019-02-03 00:45:25 (2.10 MB/s) - ‘/usr/local/bin/vncserver-stop.2’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found root@localhost:~#`
Is there a fix yet. I can use
vncserver
and a vncserver starts whichh can be accessed with vnc viewer.
$ vncserver
New 'localhost:1 ()' desktop is localhost:1
Starting applications specified in /data/data/com.termux/files/home/.vnc/xstartup
Log file is /data/data/com.termux/files/home/.vnc/localhost:1.log
But the installer tries to run
vncserver-start
which results in command not found.
de-apt-xfce4.sh: line 42: vncserver-start: command not found
Hi. vncserver-start is a very short 3 line script that assigns $HOME and $USER and then has the command vncserver.
You can just install a different remote desktop server of your choice and run it manually...
└─[~]────►./start-parrot.sh ┌─[root@localhost]─[~] └──╼ #wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2019-09-14 11:54:13-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.8’
de-apt-xfce4.sh 100%[=====>] 1.30K --.-KB/s in 0s
2019-09-14 11:54:14 (5.22 MB/s) - ‘de-apt-xfce4.sh.8’ saved [1336/1336]
Hit:1 http://ba.mirror.garr.it/mirrors/parrot rolling InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfce4 E: Unable to locate package xfce4-terminal E: Unable to locate package tightvncserver Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfe mkdir: cannot create directory ‘/root/.vnc’: File exists --2019-09-14 11:54:18-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 47 [text/plain] Saving to: ‘/root/.vnc/xstartup.9’
xstartup.9 100%[=====>] 47 --.-KB/s in 0s
2019-09-14 11:54:19 (5.18 MB/s) - ‘/root/.vnc/xstartup.9’ saved [47/47]
--2019-09-14 11:54:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start.9’
vncserver-start 100%[=====>] 98 --.-KB/s in 0s
2019-09-14 11:54:19 (15.3 MB/s) - ‘/usr/local/bin/vncserver-start.9’ saved [98/98]
--2019-09-14 11:54:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop.9’
vncserver-stop. 100%[=====>] 100 --.-KB/s in 0s
2019-09-14 11:54:20 (23.5 MB/s) - ‘/usr/local/bin/vncserver-stop.9’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found
└─[~]────►./start-parrot.sh ┌─[root@localhost]─[~] └──╼ #wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2019-09-14 11:54:13-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.8’
de-apt-xfce4.sh 100%[=====>] 1.30K --.-KB/s in 0s
2019-09-14 11:54:14 (5.22 MB/s) - ‘de-apt-xfce4.sh.8’ saved [1336/1336]
Hit:1 http://ba.mirror.garr.it/mirrors/parrot rolling InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfce4 E: Unable to locate package xfce4-terminal E: Unable to locate package tightvncserver Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfe mkdir: cannot create directory ‘/root/.vnc’: File exists --2019-09-14 11:54:18-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 47 [text/plain] Saving to: ‘/root/.vnc/xstartup.9’
xstartup.9 100%[=====>] 47 --.-KB/s in 0s
2019-09-14 11:54:19 (5.18 MB/s) - ‘/root/.vnc/xstartup.9’ saved [47/47]
--2019-09-14 11:54:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start.9’
vncserver-start 100%[=====>] 98 --.-KB/s in 0s
2019-09-14 11:54:19 (15.3 MB/s) - ‘/usr/local/bin/vncserver-start.9’ saved [98/98]
--2019-09-14 11:54:19-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop.9’
vncserver-stop. 100%[=====>] 100 --.-KB/s in 0s
2019-09-14 11:54:20 (23.5 MB/s) - ‘/usr/local/bin/vncserver-stop.9’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found
Yahhh... Ananyapam7 i have just found the solution..
The tigervnc-server-module is a module for Xorg.
To install the vncserver, you need to install tigervnc-standalone-server
assuming ur trying to install it on termux , it only works if you use the link on anlinux , install that distro then use for ubuntu wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh
kali
wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh
parrot
wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh
fedora
yum install wget -y && wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Yum/Fedora/Xfce4/de-yum-xfce4.sh && bash de-yum-xfce4.sh
I'll look upon this issue otherwise
./start-parrot.sh ┌─[root@localhost]─[~] └──╼ #wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2019-12-15 15:44:43-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.3’
de-ap 0% 0 --.-KB/s de-apt-xfce 100% 1.30K --.-KB/s in 0.003s
2019-12-15 15:44:44 (462 KB/s) - ‘de-apt-xfce4.sh.3’ saved [1336/1336]
Hit:1 http://ba.mirror.garr.it/mirrors/parrot rolling InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfce4 E: Unable to locate package xfce4-terminal E: Unable to locate package tightvncserver Reading package lists... Done Building dependency tree... Done E: Unable to locate package xfe mkdir: cannot create directory ‘/root/.vnc’: File exists --2019-12-15 15:44:51-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 47 [text/plain] Saving to: ‘/root/.vnc/xstartup.4’
xstartup.4 0% 0 --.-KB/s xstartup.4 100% 47 --.-KB/s in 0s
2019-12-15 15:44:52 (271 KB/s) - ‘/root/.vnc/xstartup.4’ saved [47/47]
--2019-12-15 15:44:52-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start.4’
vncse 0% 0 --.-KB/s vncserver-s 100% 98 --.-KB/s in 0s
2019-12-15 15:44:53 (1.23 MB/s) - ‘/usr/local/bin/vncserver-start.4’ saved [98/98]
--2019-12-15 15:44:53-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop.4’
vncserver-s 0% 0 --.-KB/s vncserver-s 100% 100 --.-KB/s in 0s
2019-12-15 15:44:54 (599 KB/s) - ‘/usr/local/bin/vncserver-stop.4’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found
┌─[✗]─[root@localhost]─[~]
└──╼ #vncserver-start
Please help me
Vncserver is not starting
Is there any fix? I'm getting the exact same bug, but with Kali Linux.
I'm having the same here
The repository 'https://dl.bintray.com/grimler/science-packages-24 science Release' does no longer have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details.
Where is vscnserver ????
/usr/local/bin/vncserver-start: line 4: vncserver: command not found
root@localhost:~#
Kali too, ☹️. Anybody knows, how to install vscncserver without AnLinux ???
Hey,I have da same problem .I noticed that it happens when my network broke.
--2020-02-13 04:57:53-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.64.133, 151.101.128.133, 151.101.192.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.64.133|:443... connected.
HTTP request sent, awaiting response... 200 OK Length: 47 [text/plain]
Saving to: ‘/root/.vnc/xstartup’
xstartup 100%[===================>] 47 --.-KB/s in 0s
2020-02-13 04:58:01 (265 KB/s) - ‘/root/.vnc/xstartup’ saved [47/47]
--2020-02-13 04:58:02-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.64.133, 151.101.128.133, 151.101.192.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.64.133|:443... connected.
Unable to establish SSL connection. --2020-02-13 04:58:37-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.64.133, 151.101.128.133, 151.101.192.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.64.133|:443... connected. HTTP request sent, awaiting response... 200 OK
Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop’
vncserver-stop 100%[===================>] 100 --.-KB/s in 0s
2020-02-13 04:58:40 (370 KB/s) - ‘/usr/local/bin/vncserver-stop’ saved [100/100]
chmod: cannot access '/usr/local/bin/vncserver-start': No such file or directory
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
de-apt-xfce4.sh: line 44: vncserver-start: command not found
So I try to install it manually,but it doesn't work yet.Can you help me?
root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start
--2020-02-13 05:00:39-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain]
Saving to: ‘vncserver-start’
vncserver-start 100%[===================>] 98 --.-KB/s in 0s
2020-02-13 05:00:47 (457 KB/s) - ‘vncserver-start’ saved [98/98]
root@localhost:~# ls de-apt-xfce4.sh vncserver-start
root@localhost:~# chmod 777 vncserver-start root@localhost:~# ls
de-apt-xfce4.sh vncserver-start root@localhost:~# mv vncserver-start /usr/local/bin
root@localhost:~# vncserver-start /usr/local/bin/vncserver-start: line 4: vncserver: command not found
I try to install vncserver ,so I use apt install tightvncserver. It works.But when I try to connect vnc ,there is nothing on the screen. root@localhost:~# vncserver-start You will require a password to access your desktops. Password: Verify: Would you like to enter a view-only password (y/n)? n xauth: file /root/.Xauthority does not exist New 'remote-desktop' desktop is localhost:1 Starting applications specified in /root/.vnc/xstartup Log file is /root/.vnc/localhost:1.log
There is my log. 13/02/20 05:31:05 Xvnc version TightVNC-1.3.10 13/02/20 05:31:05 Copyright (C) 2000-2009 TightVNC Group 13/02/20 05:31:05 Copyright (C) 1999 AT&T Laboratories Cambridge 13/02/20 05:31:05 All Rights Reserved. 13/02/20 05:31:05 See http://www.tightvnc.com/ for information on TightVNC 13/02/20 05:31:05 Desktop name 'remote-desktop' (localhost:1) 13/02/20 05:31:05 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t 13/02/20 05:31:05 Listening for VNC connections on TCP port 5901 Font directory '/usr/share/fonts/X11/Type1/' not found - ignoring Font directory '/usr/share/fonts/X11/75dpi/' not found - ignoring Font directory '/usr/share/fonts/X11/100dpi/' not found - ignoring xrdb: No such file or directory xrdb: can't open file '/root/.Xresources' /root/.vnc/xstartup: line 3: startxfce4: command not found
13/02/20 05:31:20 Got connection from client 127.0.0.1 13/02/20 05:31:20 Using protocol version 3.8 13/02/20 05:31:22 Client 127.0.0.1 gone 13/02/20 05:31:22 Statistics: 13/02/20 05:31:22 framebuffer updates 0, rectangles 0, bytes 0
13/02/20 05:32:05 Got connection from client 127.0.0.1 13/02/20 05:32:05 Using protocol version 3.8 13/02/20 05:32:31 Full-control authentication passed by 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:32:31 Using zlib encoding for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:32:31 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:32:31 Pixel format for client 127.0.0.1: 13/02/20 05:32:31 8 bpp, depth 6 13/02/20 05:32:31 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0 13/02/20 05:32:31 Using raw encoding for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:32:31 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:32:31 Using zlib encoding for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:32:31 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:32:31 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:32:31 Pixel format for client 127.0.0.1: 13/02/20 05:32:31 32 bpp, depth 24, little endian 13/02/20 05:32:31 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0 13/02/20 05:32:31 no translation needed
13/02/20 05:33:39 Got connection from client 127.0.0.1 13/02/20 05:33:39 (other clients 127.0.0.1) 13/02/20 05:33:39 Client 127.0.0.1 gone 13/02/20 05:33:39 Statistics: 13/02/20 05:33:39 key events received 0, pointer events 330 13/02/20 05:33:39 framebuffer updates 3, rectangles 52, bytes 30244 13/02/20 05:33:39 cursor shape updates 3, bytes 1668 13/02/20 05:33:39 raw rectangles 1, bytes 16396 13/02/20 05:33:39 zlib rectangles 48, bytes 12180 13/02/20 05:33:39 raw bytes equivalent 3948580, compression ratio 138.178191 13/02/20 05:33:39 Using protocol version 3.8 13/02/20 05:33:41 Full-control authentication passed by 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:33:41 Using zlib encoding for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:33:41 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:33:41 Pixel format for client 127.0.0.1: 13/02/20 05:33:41 8 bpp, depth 6 13/02/20 05:33:41 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0 13/02/20 05:33:41 Using raw encoding for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:33:41 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:33:41 Using zlib encoding for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:33:41 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:33:41 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:33:41 Pixel format for client 127.0.0.1: 13/02/20 05:33:41 32 bpp, depth 24, little endian 13/02/20 05:33:41 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0 13/02/20 05:33:41 no translation needed 13/02/20 05:36:26 Client 127.0.0.1 gone 13/02/20 05:36:26 Statistics: 13/02/20 05:36:26 key events received 0, pointer events 179 13/02/20 05:36:26 framebuffer updates 3, rectangles 52, bytes 30244 13/02/20 05:36:26 cursor shape updates 3, bytes 1668 13/02/20 05:36:26 raw rectangles 1, bytes 16396 13/02/20 05:36:26 zlib rectangles 48, bytes 12180 13/02/20 05:36:26 raw bytes equivalent 3948580, compression ratio 138.178191
13/02/20 05:41:25 Got connection from client 127.0.0.1 13/02/20 05:41:26 Using protocol version 3.8 13/02/20 05:41:26 Full-control authentication passed by 127.0.0.1 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:41:26 Using zlib encoding for client 127.0.0.1 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:41:26 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:41:26 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:41:26 Pixel format for client 127.0.0.1: 13/02/20 05:41:26 8 bpp, depth 6 13/02/20 05:41:26 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0 13/02/20 05:41:27 Using raw encoding for client 127.0.0.1 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:41:27 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 24 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 16 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 22 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 21 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding 15 13/02/20 05:41:27 Using zlib encoding for client 127.0.0.1 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding -314 13/02/20 05:41:27 Enabling full-color cursor updates for client 127.0.0.1 13/02/20 05:41:27 rfbProcessClientNormalMessage: ignoring unknown encoding -223 13/02/20 05:41:27 Pixel format for client 127.0.0.1: 13/02/20 05:41:27 32 bpp, depth 24, little endian 13/02/20 05:41:27 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0 13/02/20 05:41:27 no translation needed
Sir how can solve the error
ok
---Original--- From: "max5038"<[email protected]> Date: Fri, Aug 28, 2020 20:10 PM To: "EXALAB/AnLinux-App"<[email protected]>; Cc: "Subscribed"<[email protected]>; Subject: Re: [EXALAB/AnLinux-App] vncserver: command not found (#56)
Can you fix this yet
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.
I already forgot but i resolve it using youtube and google...
On Fri, Aug 28, 2020, 8:21 PM keshidemao [email protected] wrote:
ok
---Original--- From: "max5038"<[email protected]> Date: Fri, Aug 28, 2020 20:10 PM To: "EXALAB/AnLinux-App"<[email protected]>; Cc: "Subscribed"<[email protected]>; Subject: Re: [EXALAB/AnLinux-App] vncserver: command not found (#56)
Can you fix this yet
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/EXALAB/AnLinux-App/issues/56#issuecomment-682495281, or unsubscribe https://github.com/notifications/unsubscribe-auth/APHK4JI67YIX7A6WKEVWPZ3SC6ON5ANCNFSM4GTMIDGA .
Plz ,,i need a solution of this problem
Help
Ahmmm i already forgot but youtube have a lot of videos to how to fix that
On Sat, Dec 5, 2020, 2:27 AM rootkandol [email protected] wrote:
[image: Screenshot_20201205-012641_VNC Viewer] https://user-images.githubusercontent.com/67053204/101200497-f64b7000-3698-11eb-8bab-a17eb2eb5bc6.jpg Help
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/EXALAB/AnLinux-App/issues/56#issuecomment-738944103, or unsubscribe https://github.com/notifications/unsubscribe-auth/APHK4JL4LSIO5PIXAUVJLNLSTESYNANCNFSM4GTMIDGA .
Install tightvncserver manually
I am using Debian arm64
apt install tightvncserver
Then type
vncserver-start
And set password
I have to manually install mate de in script de-apt-mate.sh is core i want full version of mate
apt install mate-desktop-environment
Solved on kali by first running the suggested code an then on termux
pkg install x11-repo
then
pkg install tigervnc
Then starting kali again and running
dpkg --configure -a
apt-get install tigervnc-standalone-server tigervnc-viewer
And to fix the black screen I followed this video https://youtu.be/_8YZst2x9GE
apt-get install tigervnc-standalone-server tigervnc-viewer
Still getting E: Unable to locate package tigervnc-standalone-server...
`root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh && bash de-apt-xfce4.sh --2021-05-24 13:04:30-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.110.133, 185.199.111.133, 185.199.109.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.1’
de-apt-xfce4.sh 100%[=======>] 1.30K --.-KB/s in 0.002s
2021-05-24 13:04:31 (819 KB/s) - ‘de-apt-xfce4.sh.1’ saved [1336/1336]
Get:1 http://mirror.fsmg.org.nz/kali kali-rolling InRelease [30.5 kB] Err:1 http://mirror.fsmg.org.nz/kali kali-rolling InRelease The following signatures were invalid: EXPKEYSIG ED444FF07D8D0BF6 Kali Linux Repository [email protected] Reading package lists... Done W: GPG error: http://mirror.fsmg.org.nz/kali kali-rolling InRelease: The following signatures were invalid: EXPKEYSIG ED444FF07D8D0BF6 Kali Linux Repository [email protected] E: The repository 'http://mirror.fsmg.org.nz/kali kali-rolling InRelease' is not signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package xfce4 E: Unable to locate package xfce4-terminal E: Unable to locate package tightvncserver Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package xfe mkdir: cannot create directory ‘/root/.vnc’: File exists --2021-05-24 13:04:41-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.110.133, 185.199.109.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 47 [text/plain] Saving to: ‘/root/.vnc/xstartup.2’
xstartup.2 100%[=======>] 47 --.-KB/s in 0.001s
2021-05-24 13:04:46 (43.3 KB/s) - ‘/root/.vnc/xstartup.2’ saved [47/47]
--2021-05-24 13:04:46-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 98 [text/plain] Saving to: ‘/usr/local/bin/vncserver-start.2’
vncserver-start 100%[=======>] 98 --.-KB/s in 0.001s
2021-05-24 13:04:55 (71.9 KB/s) - ‘/usr/local/bin/vncserver-start.2’ saved [98/98]
--2021-05-24 13:04:55-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 100 [text/plain] Saving to: ‘/usr/local/bin/vncserver-stop.2’
vncserver-stop. 100%[=======>] 100 --.-KB/s in 0.002s
2021-05-24 13:04:57 (52.1 KB/s) - ‘/usr/local/bin/vncserver-stop.2’ saved [100/100]
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
/usr/local/bin/vncserver-start: line 4: vncserver: command not found root@localhost:~#`
Help Me 😟😟😟
Hello! I successfuly executed the vncserver-start by downloading manually the files that were missing:
mkdir /root/.vnc
cd /root/.vnc/
wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup
cd /usr/local/bin/
wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start
cd /usr/local/bin/
wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop
Then I tried to run the .sh file and it worked
./de-apt-xfce4.sh
I think that if you now run vncserver-start it could work too.
I hope it helps! 😄
PS: when I try to connect to the given ip:port I get the following error:
the port on which the computer is listening for a connection could not be contacted
Does anyone know how to continue? 😞
root@localhost:~# vncserver-start
New Xtigervnc server 'remote-desktop' on port 5901 for display :1. Use xtigervncviewer -SecurityTypes VncAuth -passwd /root/.vnc/passwd :1 to connect to the VNC server.
=================== tail /root/.vnc/localhost:5901.log ===================
xrdb: No such file or directory xrdb: can't open file '/root/.Xresources'
Session startup via '/root/.vnc/xstartup' cleanly exited too early (< 3 seconds)!
Maybe try something simple first, e.g., tigervncserver -xstartup /usr/bin/xterm The X session cleanly exited! Killing Xtigervnc process ID 10811... success! root@localhost:~#
I am getting this problem someone help me please
Issue Solved Above mentioned method works It was easy
Bro how to do it it still showing vncserver-start Command not found
Welcome to Termux!
Community forum: https://termux.com/community Gitter chat: https://gitter.im/termux/termux IRC channel: #termux on libera.chat
Working with packages:
- Search packages: pkg search
- Install a package: pkg install
- Upgrade packages: pkg upgrade
Subscribing to additional repositories:
- Root: pkg install root-repo
- Unstable: pkg install unstable-repo
- X11: pkg install x11-repo
Report issues at https://termux.com/issues
The Google Play version of the Termux app no longer receives updates. For more information, visit: https://wiki.termux.com/wiki/Termux_Google_Play
~ ./start-ubuntu.sh root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh --no-check-certificate && bash de-apt-xfce4.sh --2021-08-29 13:26:32-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.111.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.111.133|:443... connected. WARNING: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.1’
de-apt-xfce4.sh 100%[=======>] 1.30K --.-KB/s in 0s
2021-08-29 13:26:33 (4.87 MB/s) - ‘de-apt-xfce4.sh.1’ saved [1336/1336]
Hit:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done tightvncserver is already the newest version (1.3.10-0ubuntu5). xfce4 is already the newest version (4.14). xfce4-terminal is already the newest version (0.8.9.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libfprint-2-2:armhf (1:1.90.1+tod1-0ubuntu4) ... Failed to scan devices: No such file or directory dpkg: error processing package libfprint-2-2:armhf (--configure): installed libfprint-2-2:armhf package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of fprintd: fprintd depends on libfprint-2-2 (>= 1:1.90.1); however: Package libfprint-2-2:armhf is not configured yet.
dpkg: error processing package fprintd (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libpam-fprintd:armhf: libpam-fprintd:armhf depends on fprintd (= 1.90.1-1ubuntu1); however: Package fprintd is not configured yet.
dpkg: error processing package libpam-fprintd:armhf (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.31-0ubuntu9) ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: libfprint-2-2:armhf fprintd libpam-fprintd:armhf E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Done Building dependency tree Reading state information... Done xfe is already the newest version (1.43.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libfprint-2-2:armhf (1:1.90.1+tod1-0ubuntu4) ... Failed to scan devices: No such file or directory dpkg: error processing package libfprint-2-2:armhf (--configure): installed libfprint-2-2:armhf package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of fprintd: fprintd depends on libfprint-2-2 (>= 1:1.90.1); however: Package libfprint-2-2:armhf is not configured yet.
dpkg: error processing package fprintd (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libpam-fprintd:armhf: libpam-fprintd:armhf depends on fprintd (= 1.90.1-1ubuntu1); however: Package fprintd is not configured yet.
dpkg: error processing package libpam-fprintd:armhf (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.31-0ubuntu9) ...
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
libfprint-2-2:armhf
fprintd
libpam-fprintd:armhf
E: Sub-process /usr/bin/dpkg returned an error code (1)
mkdir: cannot create directory ‘/root/.vnc’: File exists
--2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’:
Unable to locally verify the issuer's authority.
To connect to raw.githubusercontent.com insecurely, use --no-check-certificate'. --2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. To connect to raw.githubusercontent.com insecurely, use --no-check-certificate'.
--2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’:
Unable to locally verify the issuer's authority.
To connect to raw.githubusercontent.com insecurely, use `--no-check-certificate'.
chmod: cannot access '/root/.vnc/xstartup': No such file or directory
chmod: cannot access '/usr/local/bin/vncserver-start': No such file or directory
chmod: cannot access '/usr/local/bin/vncserver-stop': No such file or directory
You can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
de-apt-xfce4.sh: line 44: vncserver-start: command not found root@localhost:~#
This is the error output I keep receiving. Any ideas???
It's not so hard like this you are looking for Same here with Kali Termux , non-root
kali@localhost ~ [1]> vncserver
New Xtigervnc server 'kali:1 (kali)' on port 5901 for display :1. Use xtigervncviewer -SecurityTypes VncAuth -passwd /home/kali/.vnc/passwd :1 to connect to the VNC server.
=================== tail /home/kali/.vnc/kali:5901.log ===================
Session startup via '/home/kali/.vnc/xstartup' cleanly exited too early (< 3 seconds)!
Maybe try something simple first, e.g., tigervncserver -xstartup /usr/bin/xterm The X session cleanly exited! Killing Xtigervnc process ID 20706... success!
It just happened after i did upgrade packages , i have also a backup for 2019 I think and every time i restore it , it works fine , really fine , not any problems or something like that , Anyway There could be a problem with Xfce Or , idk So could be able to fix?
Please post the screenshots so we could know the situation. Regards, EXA Lab … On Sat, Feb 2, 2019, 3:36 AM Lexank @.*** wrote: I have the same error, how can I solve it? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#56 (comment)>, or mute the thread https://github.com/notifications/unsubscribe-auth/Af5mUQICFPyjC48cJVUTuW4hCV_elrRsks5vJJcygaJpZM4abEDM .
root@localhost:~# vncserver-start
New Xtigervnc server 'remote-desktop' on port 5901 for display :1. Use xtigervncviewer -SecurityTypes VncAuth -passwd /root/.vnc/passwd :1 to connect to the VNC server.
=================== tail /root/.vnc/localhost:5901.log ===================xrdb: No such file or directory xrdb: can't open file '/root/.Xresources'
Session startup via '/root/.vnc/xstartup' cleanly exited too early (< 3 seconds)!
Maybe try something simple first, e.g., tigervncserver -xstartup /usr/bin/xterm The X session cleanly exited! Killing Xtigervnc process ID 10811... success! root@localhost:~#
I am getting this problem someone help me please
??
Welcome to Termux!
Community forum: https://termux.com/community Gitter chat: https://gitter.im/termux/termux IRC channel: #termux on libera.chat
Working with packages:
- Search packages: pkg search
- Install a package: pkg install
- Upgrade packages: pkg upgrade
Subscribing to additional repositories:
- Root: pkg install root-repo
- Unstable: pkg install unstable-repo
- X11: pkg install x11-repo
Report issues at https://termux.com/issues
The Google Play version of the Termux app no longer receives updates. For more information, visit: https://wiki.termux.com/wiki/Termux_Google_Play
~ ./start-ubuntu.sh root@localhost:~# wget https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh --no-check-certificate && bash de-apt-xfce4.sh --2021-08-29 13:26:32-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/de-apt-xfce4.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.111.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.111.133|:443... connected. WARNING: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. HTTP request sent, awaiting response... 200 OK Length: 1336 (1.3K) [text/plain] Saving to: ‘de-apt-xfce4.sh.1’
de-apt-xfce4.sh 100%[=======>] 1.30K --.-KB/s in 0s
2021-08-29 13:26:33 (4.87 MB/s) - ‘de-apt-xfce4.sh.1’ saved [1336/1336]
Hit:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done tightvncserver is already the newest version (1.3.10-0ubuntu5). xfce4 is already the newest version (4.14). xfce4-terminal is already the newest version (0.8.9.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libfprint-2-2:armhf (1:1.90.1+tod1-0ubuntu4) ... Failed to scan devices: No such file or directory dpkg: error processing package libfprint-2-2:armhf (--configure): installed libfprint-2-2:armhf package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of fprintd: fprintd depends on libfprint-2-2 (>= 1:1.90.1); however: Package libfprint-2-2:armhf is not configured yet.
dpkg: error processing package fprintd (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libpam-fprintd:armhf: libpam-fprintd:armhf depends on fprintd (= 1.90.1-1ubuntu1); however: Package fprintd is not configured yet.
dpkg: error processing package libpam-fprintd:armhf (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.31-0ubuntu9) ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: libfprint-2-2:armhf fprintd libpam-fprintd:armhf E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Done Building dependency tree Reading state information... Done xfe is already the newest version (1.43.2-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libfprint-2-2:armhf (1:1.90.1+tod1-0ubuntu4) ... Failed to scan devices: No such file or directory dpkg: error processing package libfprint-2-2:armhf (--configure): installed libfprint-2-2:armhf package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of fprintd: fprintd depends on libfprint-2-2 (>= 1:1.90.1); however: Package libfprint-2-2:armhf is not configured yet.
dpkg: error processing package fprintd (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libpam-fprintd:armhf: libpam-fprintd:armhf depends on fprintd (= 1.90.1-1ubuntu1); however: Package fprintd is not configured yet.
dpkg: error processing package libpam-fprintd:armhf (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.31-0ubuntu9) ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: libfprint-2-2:armhf fprintd libpam-fprintd:armhf E: Sub-process /usr/bin/dpkg returned an error code (1) mkdir: cannot create directory ‘/root/.vnc’: File exists --2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/xstartup Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. To connect to raw.githubusercontent.com insecurely, use
--no-check-certificate'. --2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-start Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. To connect to raw.githubusercontent.com insecurely, use--no-check-certificate'. --2021-08-29 13:27:10-- https://raw.githubusercontent.com/EXALAB/AnLinux-Resources/master/Scripts/DesktopEnvironment/Apt/Xfce4/vncserver-stop Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected. ERROR: cannot verify raw.githubusercontent.com's certificate, issued by ‘CN=DigiCert SHA2 High Assurance Server CA,OU=www.digicert.com,O=DigiCert Inc,C=US’: Unable to locally verify the issuer's authority. To connect to raw.githubusercontent.com insecurely, use `--no-check-certificate'. chmod: cannot access '/root/.vnc/xstartup': No such file or directory chmod: cannot access '/usr/local/bin/vncserver-start': No such file or directory chmod: cannot access '/usr/local/bin/vncserver-stop': No such file or directoryYou can now start vncserver by running vncserver-start
It will ask you to enter a password when first time starting it.
The VNC Server will be started at 127.0.0.1:5901
You can connect to this address with a VNC Viewer you prefer
Connect to this address will open a window with Xfce4 Desktop Environment
Running vncserver-start
To Kill VNC Server just run vncserver-stop
de-apt-xfce4.sh: line 44: vncserver-start: command not found root@localhost:~#
This is the error output I keep receiving. Any ideas???
Bro I'm just new here ,and I was have the same problem with vncserver not recognize star or stop commands but I recognize that my installation of the desktop environment was completed it says that you can start using vncserver but really it doesn't completely download it so the solution my seem to simple but use a vpn to install your desktop environment. If it work for you good luck ☺️☺️
Yahhh... Ananyapam7 i have just found the solution..
The tigervnc-server-module is a module for Xorg.
To install the vncserver, you need to install tigervnc-standalone-server
Roger That!...goin on a greeen light daddy-ohhhhhhhhhh
