iTunnel
iTunnel copied to clipboard
DomT4
make_noerase_ipsw.py error with ios11.3, hoping for your help
我的iPhone现在白苹果了，但里面的资料很重要，试过了各种办法都不行，最后终于看到你的代码终于有救了！但是ios11.3的固件转换时报错，如下：
Original IPSW file: E:\杂\iPhone_4.7_11.3.1_15E302_Restore.ipsw
Unpacking to c:\users\lvhon\appdata\local\temp\tmpwgccqk ...
ProductVersion: 11.3.1, ProductBuildVersion: 15E302, SupportedProductTypes: ['iPhone7,2', 'iPhone8,1']
Traceback (most recent call last):
File "make_noerase_ipsw.py", line 156, in
Press Enter to exit.
盼望大神回复，在线等！
my iphone 6s is totally dead with very important data that I must save, I have searched the whole internet and only your code can save my iphone without losing data. but I got some errors when I run it on IOS11.3, Could you please help me? Thank you very very Much!
waiting for the update for iOS11.X, this tool can help millions of people.
I'm open to people submitting improvements but I haven't found any easy way to update this tool to support iOS 11 with the changes Apple made to BuildManifest.plist and Restore.plist. As y'all likely know I'm not the original author of the project and thus have relatively limited experience updating this tool, sadly.
There seems to be an added complication in the iPhone Plus models shipping with different chips now as well, which has been touched upon elsewhere.
My iPhone is an iPhone X.
On Wed, Jul 18, 2018 at 17:01 Dominyk Tiller [email protected] wrote:
I'm open to people submitting improvements but I haven't found any easy way to update this tool to support iOS 11 with the changes Apple made to BuildManifest.plist and Restore.plist. As y'all likely know I'm not the original author of the project and thus have relatively limited experience updating this tool, sadly.
There seems to be an added complication in the iPhone Plus models shipping with different chips now as well, which has been touched upon elsewhere https://github.com/libimobiledevice/idevicerestore/commit/7336b600a160d731231d3ab05506e7be0c05f4e0 .
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/DomT4/iTunnel/issues/1#issuecomment-406073074, or mute the thread https://github.com/notifications/unsubscribe-auth/AnSmAtkBtpH_esiDBCPrLcBc5pxRXelbks5uH6IggaJpZM4UGsBS .
@DomT4 Hi, it's really good to have you back.
@AppleSupport on twitter advised me to restore and said it is the best and the only way to fix my phone which makes me extremely disappointed. They don't care about customers' data at all.
My issue is:
The storage of my iPhone 6 was used up and the phone got hot, extremely slow and can't be charged. I took action to uninstall some apps and got back 3GB free storage but nothing had changed. So I shut it down and tried to restart. When I started it again it was stuck on the Apple logo and soon got a blue screen and then restarted again.
After that I try to update it under recovery mode by iTunes. But after updating from iOS8.4 to iOS11.4, it is trapped into an endless loop of the step "press home to upgrade". When I do as it says, it will show an Apple logo and progress bar. the progress bar can only walk nearly 80% (60% for the 2nd time, just a few pixels for 3rd the later times) and soon it restarts. Finally it shows "press home to upgrade" again.
I am trying to post a video or gif... loop_video.zip
As far as I know, iOS is installed on an independent partition of the internal storage. And since my phone works pretty well without jailbeak before updating(just used storage up and got back again), the system partition is pure. So there comes the question, what causes the endless loop?
Do you have any ideas to fix it without losing data?