somebody-should
somebody-should copied to clipboard
A place to document practices on the wiki and collect issues/suggestions/to-do items for the physical space at DoES Liverpool
@amcewen mentioned that there used to be a weekly Doodle poll allowing organisers to say when they were going to be in the space. An email was then sent out...
This is to list exhibits and things we need to get ready for Wirral Makefest, which is on Saturday 1 June (please add your name to assignees if you want...
This is to list exhibits and things we need to get ready for Liverpool Makefest, which is on Saturday 6 July (please add your name to assignees if you want...
We needed some clear wall space in the events room for some MIAB product photography and came across a stack of sheet material. I've moved it all into the laser...
We have been having issues with stabiliser slipping in the frame on densely-stitched embroideries. [This link](https://www.kreativekiwiembroidery.co.nz/blog/How-to-hoop-stabilisers-for-in-the-hoop-projects.html) suggests applying double-sided sticky tape round the inner frame, and also using t-pins. I...
Last time I was doing an induction on the CNC Machine, we had a lot of difficulty removing the collet and cutter from the spindle motor on the CNC machine....
Have mentioned this to a few people in DoES over the last few months. For now, just want to know if there is any interest in getting one of these?...
During an induction, the engraving on a "Permission to Make" badge didn't come out well at 250/25 or 200/50. @magman2112 mentioned that a user had had issue with it last...
We have arranged access to the ground level space in the yard of the Tapestry Building that we can use as a mini-makerspace while the lift is out of action...
Sophia has a troubleshooting guide but Gerald does not, it's probably worth centralising this given they both share some (but not all) issues. Should add #1598 solution to the list...