DivingDuck

@paulbeard, was you able to solve the problem with your printer? I wonder if we can close this issue. Meanwhile we have released a new Pronterface version you can checkout...

Guess, you are running an old version of Pronterface. Please update to the latest version. https://github.com/kliment/Printrun/releases/tag/printrun-2.0.1 Smoothieware runs fine with MKS Sbase 1.3 and Pronterface. Default baud rate should be...

Try lower the baud rate to 115200 on both, Smoothieware config and Printrun. You need to reboot the controller. Btw, I was never able to get this controller to run...

Hi, I just read the comments. Some remarks: a) Pronterface usually need no admin rights for connecting with this controller via USB except your user profile do restrict it (what...

This seems to end in a MKS and Smoothieware session. :) Here you will find all TFT2.8/3.2 firmware releases: https://github.com/makerbase-mks/MKS-TFT/tree/master/MKS-TFT2.8-3.2 MKS-TFT-Hardware means this is hardware related. Includes schematics, BOM etc....

Sorry for my late answer. Regarding UTF-8: You need to create a new empty file in notepad++ (np++) first. Then check the coding and set it to UTF-8 in case...

You can deactivate the runaway protection by setting the timeout to 0. It is a bit risky, but for testing ok as long as you are near by your printer...

Hm, did you get a error message in the console window? Maybe an additional point, You did change the thermistor, correct? Are you sure you have set the correct type?...

Ha, cross posting. B is the bed thermistor then

> WTH?! There are no bed related thermal runaway settings in the config! It is by default on for all kind of heaters. You can add similar settings for the...