evdi
evdi copied to clipboard
DisplayLink
EVDI on qemu virtual host
Linux kernel: 6.15.11 evdi version: v1.14.10
I've run qemu virtual host that runs the xorg server and xterm as GUI application. I also added the "evdi" kernel modules and can see them appeared via lsmod:
> lsmod | grep evdi
evdi 94208 1
drm_kms_helper 229376 7 cirrus_qemu,bochs,drm_shmem_helper,drm_display_helper,evdi,drm_client_lib,i915
drm 745472 13 drm_kms_helper,cirrus_qemu,bochs,drm_shmem_helper,drm_display_helper,evdi,drm_buddy,drm_client_lib,i915,ttm
> cat /etc/modprobe.d/evdi.conf
options evdi initial_device_count=1
softdep evdi pre: drm_kms_helper i915
However, when I switch to xterm I can see no virtual monitors created:
> xrandr --listproviders
Providers: nunber : 2
Provider 0: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
Provider 1: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
> xrandr --listmonitors
Monitors: 1
0: +*Virtual-1 1280/325x800/203+0+0 Virtual-1
Is evdi can work with qemu? How I can see my virtual evdi monitor?
@sysescool sure!
Linux kernel: 6.17.6 evdi version: 1.14.11
> lsmod | grep evdi
evdi 94208 1
drm_kms_helper 237568 5 cirrus_qemu,bochs,drm_shmem_helper,evdi,drm_client_lib
drm 770048 9 drm_kms_helper,cirrus_qemu,bochs,drm_shmem_helper,evdi,drm_client_lib
> xrandr --listproviders
Providers: nunber : 2
Provider 0: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
Provider 1: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
> xrandr --listmonitors
Monitors: 1
0: +*Virtual-1 1280/325x800/203+0+0 Virtual-1
Xorg.0.log
[ 10.475]
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[ 10.475] Current Operating System: Linux guldan 6.17.6 #1 SMP PREEMPT_DYNAMIC 1 x86_64
[ 10.475] Kernel command line: root=/dev/vda1 gnu.system=/gnu/store/qzj6c56ln8c0vdmfgizvjqp6b5mbhr5d-system gnu.load=/gnu/store/qzj6c56ln8c0vdmfgizvjqp6b5mbhr5d-system/boot modprobe.blacklist=usbmouse,usbkbd quiet
[ 10.477]
[ 10.477] Current version of pixman: 0.46.4
[ 10.477] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.479] (==) Log file: "/home/nikita/.local/share/xorg/Xorg.0.log", Time: Sun Nov 9 14:59:19 2025
[ 10.508] (++) Using config file: "/gnu/store/5ypadqvss1y745pz5anghj1xqsg4rqld-xserver.conf"
[ 10.508] (++) Using config directory: "/gnu/store/0fk9s8i8qyz2yf31lyjkza9xzgl63kbc-xorg.conf.d"
[ 10.508] (==) Using system config directory "/gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/share/X11/xorg.conf.d"
[ 10.515] (==) No Layout section. Using the first Screen section.
[ 10.515] (==) No screen section available. Using defaults.
[ 10.515] (**) |-->Screen "Default Screen Section" (0)
[ 10.515] (**) | |-->Monitor "<default monitor>"
[ 10.517] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.517] (**) Option "AllowMouseOpenFail" "on"
[ 10.517] (**) Allowing byte-swapped clients
[ 10.517] (==) Automatically adding devices
[ 10.517] (==) Automatically enabling devices
[ 10.517] (==) Automatically adding GPU devices
[ 10.517] (==) Automatically binding GPU devices
[ 10.520] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.536] (**) FontPath set to:
/gnu/store/xp0ksknh7ry3671cfj0i0j410s3p0zcy-font-alias-1.0.5/share/fonts/X11/75dpi,
/gnu/store/xp0ksknh7ry3671cfj0i0j410s3p0zcy-font-alias-1.0.5/share/fonts/X11/100dpi,
/gnu/store/xp0ksknh7ry3671cfj0i0j410s3p0zcy-font-alias-1.0.5/share/fonts/X11/misc,
/gnu/store/xp0ksknh7ry3671cfj0i0j410s3p0zcy-font-alias-1.0.5/share/fonts/X11/cyrillic,
/gnu/store/spbq1596118zpz610x2szvr0xgjwzl18-font-misc-misc-1.1.3/share/fonts/X11/misc,
/gnu/store/f9xnlmzm29p5mg4qdw2xpammw7sl4d68-font-adobe75dpi-1.0.4/share/fonts/X11/75dpi
[ 10.538] (**) ModulePath set to "/gnu/store/dnq25xk4i53r6r29mkh45b85pnjzpfhs-xf86-video-vesa-2.6.0/lib/xorg/modules/drivers,/gnu/store/sbylfza6jpy6k2w23kmjph0b6k97g2n5-xf86-video-fbdev-0.5.1/lib/xorg/modules/drivers,/gnu/store/9ndwadg6mbggik6gljjccrv4x2cdj16n-xf86-video-amdgpu-23.0.0/lib/xorg/modules/drivers,/gnu/store/ia6kkmx3b5f7h8x3kbf40qpggv86d298-xf86-video-ati-19.1.0-1.5eba006/lib/xorg/modules/drivers,/gnu/store/256f55rpl7v79gzlr2vrqajhggx8k7al-xf86-video-cirrus-1.6.0/lib/xorg/modules/drivers,/gnu/store/77vscj0plsl2pjkl8xwijpyq95195jfs-xf86-video-intel-2.99.917-18.31486f4/lib/xorg/modules/drivers,/gnu/store/89fn075bxamd870w0j4n0n1n4is7cdrw-xf86-video-mach64-6.10.0/lib/xorg/modules/drivers,/gnu/store/7m120p9n3swkk2kzw1valhi8mwdb812c-xf86-video-nouveau-1.0.18/lib/xorg/modules/drivers,/gnu/store/vrmq7ahc6mg516w3krjjszakhv1z0dfl-xf86-video-nv-2.1.23/lib/xorg/modules/drivers,/gnu/store/gpkp0bv9lci45mn3z246r4xkjkr8n8ks-xf86-video-sis-0.12.0/lib/xorg/modules/drivers,/gnu/store/kkd4b0az18s8r98lwwbl2kxxhzmgar74-xf86-in
[ 10.539] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.539] (II) Loader magic: 0x647dc0
[ 10.539] (II) Module ABI versions:
[ 10.539] X.Org ANSI C Emulation: 0.4
[ 10.539] X.Org Video Driver: 25.2
[ 10.539] X.Org XInput driver : 24.4
[ 10.539] X.Org Server Extension : 10.0
[ 10.565] (++) using VT number 1
[ 10.585] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c6
[ 10.585] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.585] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 10.593] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 10.594] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 10.594] (II) Platform probe for /sys/devices/platform/evdi.0/drm/card1
[ 10.600] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[ 10.603] (--) PCI:*(0@0:2:0) 1234:1111:1af4:1100 rev 2, Mem @ 0xfd000000/16777216, 0xfebd0000/4096, BIOS @ 0x????????/131072
[ 10.603] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.603] (II) LoadModule: "glx"
[ 10.729] (II) Loading /gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/lib/xorg/modules/extensions/libglx.so
[ 11.597] (II) Module glx: vendor="X.Org Foundation"
[ 11.597] compiled for 1.21.1.18, module version = 1.0.0
[ 11.597] ABI class: X.Org Server Extension, version 10.0
[ 11.597] (==) Matched modesetting as autoconfigured driver 0
[ 11.597] (==) Matched fbdev as autoconfigured driver 1
[ 11.597] (==) Matched vesa as autoconfigured driver 2
[ 11.597] (==) Assigned the driver to the xf86ConfigLayout
[ 11.598] (II) LoadModule: "modesetting"
[ 11.677] (II) Loading /gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.680] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.681] compiled for 1.21.1.18, module version = 1.21.1
[ 11.681] Module class: X.Org Video Driver
[ 11.681] ABI class: X.Org Video Driver, version 25.2
[ 11.681] (II) LoadModule: "fbdev"
[ 11.706] (II) Loading /gnu/store/sbylfza6jpy6k2w23kmjph0b6k97g2n5-xf86-video-fbdev-0.5.1/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.719] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.719] compiled for 1.21.1.18, module version = 0.5.1
[ 11.719] Module class: X.Org Video Driver
[ 11.719] ABI class: X.Org Video Driver, version 25.2
[ 11.719] (II) LoadModule: "vesa"
[ 11.723] (II) Loading /gnu/store/dnq25xk4i53r6r29mkh45b85pnjzpfhs-xf86-video-vesa-2.6.0/lib/xorg/modules/drivers/vesa_drv.so
[ 11.726] (II) Module vesa: vendor="X.Org Foundation"
[ 11.726] compiled for 1.21.1.18, module version = 2.6.0
[ 11.726] Module class: X.Org Video Driver
[ 11.726] ABI class: X.Org Video Driver, version 25.2
[ 11.726] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.726] (II) FBDEV: driver for framebuffer: fbdev
[ 11.726] (II) VESA: driver for VESA chipsets: vesa
[ 11.730] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 11.730] (II) modeset(0): using drv /dev/dri/card0
[ 11.730] (WW) Falling back to old probe method for fbdev
[ 11.730] (II) Loading sub module "fbdevhw"
[ 11.730] (II) LoadModule: "fbdevhw"
[ 11.842] (II) Loading /gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/lib/xorg/modules/libfbdevhw.so
[ 11.859] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.859] compiled for 1.21.1.18, module version = 0.0.2
[ 11.859] ABI class: X.Org Video Driver, version 25.2
[ 11.859] (II) modeset(G0): using drv /dev/dri/card1
[ 11.859] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 11.859] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.859] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 11.859] (==) modeset(0): RGB weight 888
[ 11.859] (==) modeset(0): Default visual is TrueColor
[ 11.859] (II) Loading sub module "glamoregl"
[ 11.859] (II) LoadModule: "glamoregl"
[ 11.947] (II) Loading /gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/lib/xorg/modules/libglamoregl.so
[ 11.989] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11.989] compiled for 1.21.1.18, module version = 1.0.1
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.831] (II) modeset(0): Refusing to try glamor on llvmpipe
[ 12.860] (II) modeset(0): glamor initialization failed
[ 12.860] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[ 12.894] (II) modeset(0): Output Virtual-1 has no monitor section
[ 12.894] (II) modeset(0): Up to 1 crtcs needed for screen.
[ 12.894] (II) modeset(0): Allocated crtc nr. 0 to this screen.
[ 12.916] (II) modeset(0): EDID for output Virtual-1
[ 12.916] (II) modeset(0): Manufacturer: RHT Model: 1234 Serial#: 0
[ 12.916] (II) modeset(0): Year: 2014 Week: 42
[ 12.916] (II) modeset(0): EDID Version: 1.4
[ 12.916] (II) modeset(0): Digital Display Input
[ 12.916] (II) modeset(0): 8 bits per channel
[ 12.916] (II) modeset(0): Digital interface is DisplayPort
[ 12.916] (II) modeset(0): Max Image Size [cm]: horiz.: 32 vert.: 20
[ 12.916] (II) modeset(0): Gamma: 2.20
[ 12.916] (II) modeset(0): No DPMS capabilities specified
[ 12.916] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 12.916] (II) modeset(0): Default color space is primary color space
[ 12.916] (II) modeset(0): First detailed timing is preferred mode
[ 12.916] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 12.916] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 12.916] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 12.917] (II) modeset(0): Supported established timings:
[ 12.917] (II) modeset(0): 640x480@60Hz
[ 12.917] (II) modeset(0): 800x600@60Hz
[ 12.917] (II) modeset(0): 1024x768@60Hz
[ 12.917] (II) modeset(0): Manufacturer's mask: 0
[ 12.917] (II) modeset(0): Supported standard timings:
[ 12.917] (II) modeset(0): #0: hsize: 2048 vsize 1152 refresh: 60 vid: 49377
[ 12.917] (II) modeset(0): #1: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 12.917] (II) modeset(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 12.917] (II) modeset(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 12.917] (II) modeset(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.917] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 12.917] (II) modeset(0): #6: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.917] (II) modeset(0): #7: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.917] (II) modeset(0): Supported detailed timing:
[ 12.917] (II) modeset(0): clock: 107.3 MHz Image Size: 325 x 203 mm
[ 12.917] (II) modeset(0): h_active: 1280 h_sync: 1600 h_sync_end 1638 h_blank_end 1728 h_border: 0
[ 12.917] (II) modeset(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 828 v_border: 0
[ 12.917] (II) modeset(0): Established timings III: (not decoded)
[ 12.917] (II) modeset(0): Ranges: V min: 50 V max: 125 Hz, H min: 30 H max: 160 kHz,
[ 12.917] (II) modeset(0): Monitor name: QEMU Monitor
[ 12.917] (II) modeset(0): Number of EDID sections to follow: 1
[ 12.917] (II) modeset(0): EDID (in hex):
[ 12.917] (II) modeset(0): 00ffffffffffff004914341200000000
[ 12.917] (II) modeset(0): 2a180104a520147806ee91a3544c9926
[ 12.917] (II) modeset(0): 0f5054210800e1c0d1c0d100a940b300
[ 12.917] (II) modeset(0): 950081808140ea2900c051201c304026
[ 12.917] (II) modeset(0): 444045cb10000018000000f7000a0040
[ 12.917] (II) modeset(0): 82002820000000000000000000fd0032
[ 12.917] (II) modeset(0): 7d1ea0ff010a202020202020000000fc
[ 12.917] (II) modeset(0): 0051454d55204d6f6e69746f720a013a
[ 12.917] (II) modeset(0): 02030b00467d6560591f610000001000
[ 12.917] (II) modeset(0): 00000000000000000000000000000000
[ 12.917] (II) modeset(0): 10000000000000000000000000000000
[ 12.917] (II) modeset(0): 00001000000000000000000000000000
[ 12.917] (II) modeset(0): 00000000100000000000000000000000
[ 12.917] (II) modeset(0): 00000000000010000000000000000000
[ 12.917] (II) modeset(0): 00000000000000001000000000000000
[ 12.917] (II) modeset(0): 0000000000000000000000000000002f
[ 12.917] (II) modeset(0): Printing probed modes for output Virtual-1
[ 12.917] (II) modeset(0): Modeline "1280x800"x75.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 12.917] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 12.917] (II) modeset(0): Modeline "2560x1080"x50.0 185.62 2560 3108 3152 3300 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 12.917] (II) modeset(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 12.917] (II) modeset(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 12.917] (II) modeset(0): Modeline "2048x1152"x60.0 162.00 2048 2074 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
[ 12.917] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 12.917] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[ 12.917] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 12.917] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 12.917] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 12.917] (II) modeset(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 12.917] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.917] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 12.917] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.917] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 12.917] (II) modeset(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 12.917] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.917] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.917] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.917] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.917] (II) modeset(0): Output Virtual-1 connected
[ 12.917] (II) modeset(0): Using exact sizes for initial modes
[ 12.917] (II) modeset(0): Output Virtual-1 using initial mode 1280x800 +0+0
[ 12.917] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.917] (==) modeset(0): DPI set to (96, 96)
[ 12.917] (II) Loading sub module "fb"
[ 12.917] (II) LoadModule: "fb"
[ 12.917] (II) Module "fb" already built-in
[ 12.918] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 12.918] (==) modeset(G0): RGB weight 888
[ 12.918] (==) modeset(G0): Default visual is TrueColor
[ 12.918] (II) Loading sub module "glamoregl"
[ 12.918] (II) LoadModule: "glamoregl"
[ 13.029] (II) Loading /gnu/store/9gwmdj37nwajni67wbyg8rrvn29hs45k-xorg-server-21.1.18/lib/xorg/modules/libglamoregl.so
[ 13.029] (II) Module glamoregl: vendor="X.Org Foundation"
[ 13.029] compiled for 1.21.1.18, module version = 1.0.1
[ 13.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.467] (II) modeset(G0): Refusing to try glamor on llvmpipe
[ 13.500] (II) modeset(G0): glamor initialization failed
[ 13.502] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
[ 13.505] (II) modeset(G0): Output DVI-I-1-1 has no monitor section
[ 13.508] (II) modeset(G0): Up to 1 crtcs needed for screen.
[ 13.508] (II) modeset(G0): Allocated crtc nr. 0 to this screen.
[ 13.508] (II) modeset(G0): EDID for output DVI-I-1-1
[ 13.508] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.508] (==) modeset(G0): DPI set to (96, 96)
[ 13.508] (II) Loading sub module "fb"
[ 13.508] (II) LoadModule: "fb"
[ 13.508] (II) Module "fb" already built-in
[ 13.508] (II) UnloadModule: "fbdev"
[ 13.508] (II) Unloading fbdev
[ 13.514] (II) UnloadSubModule: "fbdevhw"
[ 13.514] (II) Unloading fbdevhw
[ 13.518] (II) UnloadModule: "vesa"
[ 13.518] (II) Unloading vesa
[ 13.526] (==) modeset(0): Backing store enabled
[ 13.527] (==) modeset(0): Silken mouse enabled
[ 13.537] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 13.537] (==) modeset(0): DPMS enabled
[ 13.537] (==) modeset(G0): Backing store enabled
[ 13.538] (==) modeset(G0): Silken mouse enabled
[ 13.538] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 13.543] (==) modeset(G0): DPMS enabled
[ 13.543] (II) Initializing extension Generic Event Extension
[ 13.543] (II) Initializing extension SHAPE
[ 13.543] (II) Initializing extension MIT-SHM
[ 13.543] (II) Initializing extension XInputExtension
[ 13.548] (II) Initializing extension XTEST
[ 13.550] (II) Initializing extension BIG-REQUESTS
[ 13.550] (II) Initializing extension SYNC
[ 13.550] (II) Initializing extension XKEYBOARD
[ 13.550] (II) Initializing extension XC-MISC
[ 13.550] (II) Initializing extension SECURITY
[ 13.550] (II) Initializing extension XFIXES
[ 13.550] (II) Initializing extension RENDER
[ 13.551] (II) Initializing extension RANDR
[ 13.551] (II) Initializing extension COMPOSITE
[ 13.551] (II) Initializing extension DAMAGE
[ 13.551] (II) Initializing extension MIT-SCREEN-SAVER
[ 13.551] (II) Initializing extension DOUBLE-BUFFER
[ 13.551] (II) Initializing extension RECORD
[ 13.551] (II) Initializing extension DPMS
[ 13.551] (II) Initializing extension Present
[ 13.574] (II) Initializing extension DRI3
[ 13.574] (II) Initializing extension X-Resource
[ 13.574] (II) Initializing extension XVideo
[ 13.574] (II) Initializing extension XVideo-MotionCompensation
[ 13.574] (II) Initializing extension GLX
[ 13.574] (II) AIGLX: Screen 0 is not DRI2 capable
[ 13.594] (II) IGLX: Loaded and initialized swrast
[ 13.594] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 13.594] (II) Initializing extension XFree86-VidModeExtension
[ 13.594] (II) Initializing extension XFree86-DGA
[ 13.594] (II) Initializing extension XFree86-DRI
[ 13.594] (II) Initializing extension DRI2
[ 13.643] (II) modeset(G0): Damage tracking initialized
[ 13.673] (II) modeset(0): Damage tracking initialized
[ 13.673] (II) modeset(0): Setting screen physical size to 338 x 211
[ 14.214] (II) XKB: Reusing cached keymap
[ 14.230] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 14.230] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.230] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 14.230] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.230] (II) LoadModule: "evdev"
[ 14.287] (II) Loading /gnu/store/4blxp5r5fcsfwlg5gd3qwjyx42yg2shn-xf86-input-evdev-2.11.0/lib/xorg/modules/input/evdev_drv.so
[ 14.300] (II) Module evdev: vendor="X.Org Foundation"
[ 14.301] compiled for 1.21.1.18, module version = 2.11.0
[ 14.301] Module class: X.Org XInput Driver
[ 14.301] ABI class: X.Org XInput driver, version 24.4
[ 14.301] (II) Using input driver 'evdev' for 'Power Button'
[ 14.311] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 21 paused 0
[ 14.311] (**) Power Button: always reports core events
[ 14.311] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 14.311] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.311] (--) evdev: Power Button: Found keys
[ 14.311] (II) evdev: Power Button: Configuring as keyboard
[ 14.311] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[ 14.311] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.311] (**) Option "xkb_rules" "evdev"
[ 14.311] (**) Option "xkb_layout" "pl,ru"
[ 14.315] (**) Option "xkb_options" "grp:shifts_toggle,caps:escape"
[ 14.612] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 14.612] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.612] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 14.612] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.612] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.617] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[ 14.617] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.617] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 14.617] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.617] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.617] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.617] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 14.617] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7)
[ 14.617] (**) Option "xkb_rules" "evdev"
[ 14.617] (**) Option "xkb_layout" "pl,ru"
[ 14.617] (**) Option "xkb_options" "grp:shifts_toggle,caps:escape"
[ 14.617] (II) XKB: Reusing cached keymap
[ 14.619] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event4)
[ 14.619] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall"
[ 14.619] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[ 14.619] (II) LoadModule: "libinput"
[ 14.654] (II) Loading /gnu/store/kkd4b0az18s8r98lwwbl2kxxhzmgar74-xf86-input-libinput-1.5.0/lib/xorg/modules/input/libinput_drv.so
[ 14.667] (II) Module libinput: vendor="X.Org Foundation"
[ 14.667] compiled for 1.21.1.18, module version = 1.5.0
[ 14.667] Module class: X.Org XInput Driver
[ 14.667] ABI class: X.Org XInput driver, version 24.4
[ 14.667] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[ 14.670] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23 paused 0
[ 14.670] (**) VirtualPS/2 VMware VMMouse: always reports core events
[ 14.670] (**) Option "Device" "/dev/input/event4"
[ 14.808] (**) Option "Device" "/dev/input/event4"
[ 14.809] (II) event4 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[ 14.809] (II) event4 - VirtualPS/2 VMware VMMouse: emulating high-resolution scroll wheel events.
[ 14.809] (II) event4 - VirtualPS/2 VMware VMMouse: device is a pointer
[ 14.810] (II) event4 - VirtualPS/2 VMware VMMouse: device removed
[ 14.810] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.810] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.810] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 14.810] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8)
[ 14.810] (**) Option "AccelerationScheme" "none"
[ 14.810] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[ 14.810] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[ 14.810] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[ 14.810] (**) Option "Device" "/dev/input/event4"
[ 14.811] (II) event4 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[ 14.811] (II) event4 - VirtualPS/2 VMware VMMouse: emulating high-resolution scroll wheel events.
[ 14.811] (II) event4 - VirtualPS/2 VMware VMMouse: device is a pointer
[ 14.811] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1)
[ 14.811] (II) No input driver specified, ignoring this device.
[ 14.811] (II) This device may have been added with another device file.
[ 14.824] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event3)
[ 14.824] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "evdev pointer catchall"
[ 14.824] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[ 14.824] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[ 14.828] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[ 14.829] (**) VirtualPS/2 VMware VMMouse: always reports core events
[ 14.829] (**) Option "Device" "/dev/input/event3"
[ 14.829] (**) Option "Device" "/dev/input/event3"
[ 14.829] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[ 14.830] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer
[ 14.830] (II) event3 - VirtualPS/2 VMware VMMouse: device removed
[ 14.830] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event3"
[ 14.830] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 9)
[ 14.830] (**) Option "AccelerationScheme" "none"
[ 14.830] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[ 14.830] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[ 14.830] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[ 14.830] (**) Option "Device" "/dev/input/event3"
[ 14.830] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[ 14.831] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer
[ 14.831] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0)
[ 14.831] (II) No input driver specified, ignoring this device.
[ 14.831] (II) This device may have been added with another device file.
[ 14.831] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 14.831] (II) No input driver specified, ignoring this device.
[ 14.831] (II) This device may have been added with another device file.
[ 14.922] (II) modeset(0): EDID vendor "RHT", prod id 4660
[ 14.929] (II) modeset(0): Using EDID range info for horizontal sync
[ 14.932] (II) modeset(0): Using EDID range info for vertical refresh
[ 14.932] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.933] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 14.935] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 14.935] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 14.935] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 14.935] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 14.935] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 14.935] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 14.935] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 14.935] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.935] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.935] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.938] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e)
[ 14.938] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 14.938] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 14.938] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.938] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 14.939] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 14.941] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.941] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.500] (II) config/udev: Adding input device Mouse passthrough (absolute) (/dev/input/js0)
[ 16.500] (II) No input driver specified, ignoring this device.
[ 16.500] (II) This device may have been added with another device file.
[ 16.524] (II) config/udev: Adding input device Mouse passthrough (absolute) (/dev/input/mouse3)
[ 16.524] (II) No input driver specified, ignoring this device.
[ 16.524] (II) This device may have been added with another device file.
[ 16.545] (II) config/udev: Adding input device Mouse passthrough (/dev/input/mouse2)
[ 16.545] (II) No input driver specified, ignoring this device.
[ 16.545] (II) This device may have been added with another device file.
[ 16.566] (II) config/udev: Adding input device Mouse passthrough (absolute) (/dev/input/event6)
[ 16.566] (**) Mouse passthrough (absolute): Applying InputClass "evdev pointer catchall"
[ 16.566] (**) Mouse passthrough (absolute): Applying InputClass "libinput pointer catchall"
[ 16.573] (II) Using input driver 'libinput' for 'Mouse passthrough (absolute)'
[ 16.578] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[ 16.579] (**) Mouse passthrough (absolute): always reports core events
[ 16.579] (**) Option "Device" "/dev/input/event6"
[ 16.582] (**) Option "Device" "/dev/input/event6"
[ 16.588] (II) event6 - Mouse passthrough (absolute): is tagged by udev as: Mouse
[ 16.588] (II) event6 - Mouse passthrough (absolute): device is a pointer
[ 16.588] (II) event6 - Mouse passthrough (absolute): device removed
[ 16.588] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 16.588] (II) XINPUT: Adding extended input device "Mouse passthrough (absolute)" (type: MOUSE, id 10)
[ 16.589] (**) Option "AccelerationScheme" "none"
[ 16.589] (**) Mouse passthrough (absolute): (accel) selected scheme none/0
[ 16.589] (**) Mouse passthrough (absolute): (accel) acceleration factor: 2.000
[ 16.589] (**) Mouse passthrough (absolute): (accel) acceleration threshold: 4
[ 16.597] (**) Option "Device" "/dev/input/event6"
[ 16.597] (II) event6 - Mouse passthrough (absolute): is tagged by udev as: Mouse
[ 16.597] (II) event6 - Mouse passthrough (absolute): device is a pointer
[ 16.598] (II) config/udev: Adding input device Mouse passthrough (/dev/input/event5)
[ 16.598] (**) Mouse passthrough: Applying InputClass "evdev pointer catchall"
[ 16.598] (**) Mouse passthrough: Applying InputClass "libinput pointer catchall"
[ 16.598] (II) Using input driver 'libinput' for 'Mouse passthrough'
[ 16.612] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 29 paused 0
[ 16.612] (**) Mouse passthrough: always reports core events
[ 16.612] (**) Option "Device" "/dev/input/event5"
[ 16.612] (**) Option "Device" "/dev/input/event5"
[ 16.612] (II) event5 - Mouse passthrough: is tagged by udev as: Mouse
[ 16.613] (II) event5 - Mouse passthrough: device is a pointer
[ 16.613] (II) event5 - Mouse passthrough: device removed
[ 16.613] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 16.613] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 16.613] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 16.613] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[ 16.613] (II) XINPUT: Adding extended input device "Mouse passthrough" (type: MOUSE, id 11)
[ 16.613] (**) Option "AccelerationScheme" "none"
[ 16.613] (**) Mouse passthrough: (accel) selected scheme none/0
[ 16.613] (**) Mouse passthrough: (accel) acceleration factor: 2.000
[ 16.613] (**) Mouse passthrough: (accel) acceleration threshold: 4
[ 16.613] (**) Option "Device" "/dev/input/event5"
[ 16.613] (II) event5 - Mouse passthrough: is tagged by udev as: Mouse
[ 16.614] (II) event5 - Mouse passthrough: device is a pointer
[ 16.614] (II) config/udev: Adding input device Keyboard passthrough (/dev/input/event7)
[ 16.614] (**) Keyboard passthrough: Applying InputClass "evdev keyboard catchall"
[ 16.614] (**) Keyboard passthrough: Applying InputClass "libinput keyboard catchall"
[ 16.614] (**) Keyboard passthrough: Applying InputClass "evdev keyboard catchall"
[ 16.614] (II) Using input driver 'evdev' for 'Keyboard passthrough'
[ 16.631] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 16.631] (**) Keyboard passthrough: always reports core events
[ 16.632] (**) evdev: Keyboard passthrough: Device: "/dev/input/event7"
[ 16.632] (--) evdev: Keyboard passthrough: Vendor 0xbeef Product 0xdead
[ 16.632] (--) evdev: Keyboard passthrough: Found keys
[ 16.632] (II) evdev: Keyboard passthrough: Configuring as keyboard
[ 16.632] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 16.632] (II) XINPUT: Adding extended input device "Keyboard passthrough" (type: KEYBOARD, id 12)
[ 16.632] (**) Option "xkb_rules" "evdev"
[ 16.632] (**) Option "xkb_layout" "pl,ru"
[ 16.632] (**) Option "xkb_options" "grp:shifts_toggle,caps:escape"
[ 16.632] (II) XKB: Reusing cached keymap
[ 16.742] (II) config/udev: Adding input device (unnamed) (/dev/input/event8)
[ 16.742] (II) No input driver specified, ignoring this device.
[ 16.742] (II) This device may have been added with another device file.
[ 16.749] (II) config/udev: Adding input device (unnamed) (/dev/input/js2)
[ 16.749] (II) No input driver specified, ignoring this device.
[ 16.749] (II) This device may have been added with another device file.
[ 16.754] (II) config/udev: Adding input device (unnamed) (/dev/input/js1)
[ 16.754] (II) No input driver specified, ignoring this device.
[ 16.754] (II) This device may have been added with another device file.
[ 16.775] (II) config/udev: Adding input device (unnamed) (/dev/input/event9)
[ 16.775] (II) No input driver specified, ignoring this device.
[ 16.775] (II) This device may have been added with another device file.
[ 134.252] (II) modeset(0): EDID vendor "RHT", prod id 4660
[ 134.253] (II) modeset(0): Using hsync ranges from config file
[ 134.253] (II) modeset(0): Using vrefresh ranges from config file
[ 134.253] (II) modeset(0): Printing DDC gathered Modelines:
[ 134.253] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 134.253] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 134.253] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 134.253] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 134.253] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 134.253] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 134.253] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 134.253] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 134.253] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 134.253] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 134.253] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 134.253] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e)
[ 134.253] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 134.253] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 134.253] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 134.253] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 134.253] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 134.253] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 134.253] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 134.262] (II) modeset(0): EDID vendor "RHT", prod id 4660
[ 134.262] (II) modeset(0): Using hsync ranges from config file
[ 134.262] (II) modeset(0): Using vrefresh ranges from config file
[ 134.262] (II) modeset(0): Printing DDC gathered Modelines:
[ 134.262] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 134.262] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 134.262] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 134.262] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 134.262] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 134.262] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 134.262] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 134.262] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 134.262] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 134.262] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 134.262] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 134.262] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e)
[ 134.262] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 134.262] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 134.262] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 134.262] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 134.262] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 134.262] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 134.262] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 148.943] (II) modeset(0): EDID vendor "RHT", prod id 4660
[ 148.943] (II) modeset(0): Using hsync ranges from config file
[ 148.943] (II) modeset(0): Using vrefresh ranges from config file
[ 148.943] (II) modeset(0): Printing DDC gathered Modelines:
[ 148.943] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 148.943] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 148.943] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 148.943] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 148.943] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 148.943] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 148.943] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 148.944] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 148.944] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 148.944] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 148.944] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 148.944] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e)
[ 148.944] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 148.944] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 148.944] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 148.944] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 148.944] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 148.944] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 148.944] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 148.952] (II) modeset(0): EDID vendor "RHT", prod id 4660
[ 148.952] (II) modeset(0): Using hsync ranges from config file
[ 148.952] (II) modeset(0): Using vrefresh ranges from config file
[ 148.952] (II) modeset(0): Printing DDC gathered Modelines:
[ 148.952] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP)
[ 148.952] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 148.952] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 148.952] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 148.952] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 148.952] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 148.953] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 148.953] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 148.953] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 148.953] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 148.953] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 148.953] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e)
[ 148.953] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 148.953] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 148.953] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 148.953] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 148.953] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 148.953] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 148.953] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
@forgoty I meet the same issue. I notice that:
> xrandr --listproviders
Providers: nunber : 2
Provider 0: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
Provider 1: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
You have no associated providers. I don't know how to associate.
If you use a real machine with video card. After you add screen run xrandr --listproviders, it should like:
> xrandr --listproviders
Providers: nunber : 2
Provider 0: id: Ox40 capt [**NOT 0x0**], Sink Output crtest 1 outputs: 1 associated providers: [**n**] name:madesetting
Provider 1: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
Provider 2: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
Provider ....
Provider n: id: Ox40 capt 0x2, Sink Output crtest 1 outputs: 1 associated providers: 0 name:madesetting
The Provider 0 is the video card in your real machine. The Provider 1-n is the video card created by evdi. and Provider 0 associated the other Providers.
I'm stuck there, I don't know how to let the Provider 0 associate the other. And the capt of Provider 0 created by qemu is 0x0.
If it is 0x0, means it has no any caps.
Please let me know if there is any progress.