modified pcb for alternative parts

[designer2k2]

Hello, change in PCB to fit alternative toslink and rca jack. Small change also added round edges. (moved text on schematic into header)

I made some adapters like this for me to confirm they work.

Feel free to take only whats of interest to you, i would sugges to take the alternative toslink footprint.

[DiscoStarslayer]

@designer2k2 Thanks for the pull request! It is unfortunate the original toslink adapter is end of life. I'll be sure to roll that change in! Thanks for putting in the work for that!

Curious why you went with the other RCA jacks, ease of access/lower cost?

[designer2k2]

the RCA jack PJRAN3X1U03X is only available over digikey for privates in europe: https://octopart.com/search?q=PJRAN3X1U03X
Where digikey charges a lot for shipment, so i searched for alternatives and found the single units i used.

Overall hardest to source was the AVIP connector, where i recycled a cheap xbox cable as i could not get hold of a new one.

[DiscoStarslayer]

If you're looking for 100+ connectors I can put you in touch with the supplier through DM's. Looks like you can also get packs of 10 off aliexpress now: https://www.aliexpress.com/item/33014171056.html

Console5 also sells them individually for a very fair price: https://console5.com/store/microsoft-xbox-av-multi-out-plug-for-custom-rgb-cables-repair-og-original.html

I'll update the readme with some of these links, as it can be hard to source for sure!

[designer2k2]

thanks for the Alixp Link, 10 is more than enough! Console5 is great, but the shipping and tax cost make it not the first choice here in europe...