Alain Turbide

The vista 20p uses a very basic protocol and does not send much in the way of info. The expectation is for the keypad emulation to keep track of what...

Actually technically, only the on board 8 panel zones would need a ttl since the other expander (4219/4229) or rf hosted zones could be monitored (via the 98/9E cmd responses...

> Thanks for the time! Excellent idea, except for the fact that most of my zones are RF zones, and I haven't found anything to read these sensors. > >...

Sorry that is in the ecp protocol. Not a system cmd On Thu., Jun. 17, 2021, 8:19 p.m. alan-bc, ***@***.***> wrote: > Cmd 9e responses will give you all the...

@pipedeveloper, sorry I just noticed your comment now. The times should match. I've also added some fixes on the system to correctly update the time on bootup. If you look...

This all points to a bad wiring connection from your esp to the panel. There is no address to configure.

Please add this PR. Migrating a custom component to an external_component caused code duplication as the old include build data was never removed! Seriously why would this even be allowed...

Yes, it works fine with the vista50p. The 50p also supports polling loops which are not directly accessible by the esp code but the zone statuses will still be accessible...

Vista's do not report closing to the display that I know of. Perhaps you can post logs of your panel messsages and we can see if yours is reporting different...

Ok, I should clarify. The display really only displays what the panel sends it. When a fault occurs, the panel sends a "fault" message to the display. When the fault...