DiSlord

Saver show correct values in Om See https://en.wikipedia.org/wiki/Admittance G = R / (R * R + X * X) B = - X / (R * R + X *...

While add admittance in NanoVNA firmware i add additional markers: [MS_GB] = "G + jB", // in Siemens [MS_GLC] = "G + L/C", // G in Siemens [MS_RpXp] = "Rp...

Not correct default calibration setting for LCD, need fix it

Some display module on V2Plus4 flick, some not. My module begin after some time of work (more better see on full dark baskground, example on enter to DFU mode) This...

This patch not support variable points mode, need port it from my code

Hmm X+1 pints give X intervals between points (frequency step) If span = 1k then step = 1k / x and for 101 point result 1k/100 = 10 Hz step...

100 solve problem only for N*99 Hz span, wny only this? Why not N * 98 ot others? Best solution add point input keyboard as on V2

No memory leakage in nano (not use dynamic memory allocation) This can be hardware due to overclock i2c bus

In LiteVNA use ~1.5M i2s bus, and all stable (but use MS5351 generator) and yes use 2k2 resistors. So possible this help. PS try also last v1.2 i made small...

Need switch to H4 branch, not merge it in master yet