AMD encoder sends audio but not video to Switch, app remains on purple IP address screen

[doctorsangria]

CPU encoder works alright, although unusable for my purposes since I want to run an N64 emulator, and I guess running skynx with the CPU option at the same time is too much.

As mentioned in the title the audio works just fine for some reason.

Copied and pasted the log into a text document: skynx amd encoder log.txt

Card is an RX 580.

[ma-shulgin]

Have the same bug on rx 570

[williamhackett0]

Same issue however on a RX 5700xt.

[h264_amf @ 000001b2258b2c00] [Eval @ 0000005845ffdf50] Undefined constant or missing '(' in 'vbr' [h264_amf @ 000001b2258b2c00] Unable to parse option value "vbr" [h264_amf @ 000001b2258b2c00] Error setting option rc to value vbr. Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height Conversion failed! VideoProcess process exited with code 1 switchFps=0 ...

[williamhackett0]

@ale-reyes @ma-shulgin Decided to fix the issue myself. You can download the new version below :)

New Release: https://github.com/williamhackett0/SkyNX/releases Forked Repo: https://github.com/williamhackett0/SkyNX

Hopefully will be on the main repo if accepted!

[ADMania]

@williamhackett0 Hi. I install your build of SkyNX, but I have a problem. My card is RX470 and when I press "Start Streamer" it connects only for 2 seconds, then error 138 occurs. So it can't connect with Switch later and say "ETIMEDOUT". There are a solution of this problem? Full log attach. SkyNX log.txt