Candle

Candle copied to clipboard

При снятии карты высот ложное срабатывание.

3

При снятии карты высот, очень часто происходят ложные срабатывания, то есть щуп еще не опустился до тексталита, а программно уже замкнулись, и переходит к след. точке. такое происходит буквально каждые...

onatskiy-sergey

1.2.14b source code

6

Could you upload please source code of 1.2.14b version? Thanks in advance.

vvv1954

It would be useful to add triangular interpolation for autoleveling. I made [same experiments](https://www.youtube.com/watch?v=0SLV634TFa4), it works better than the bi-linear one.

vvv1954

Изменить алгоритм работы кнопок "ZeroXY", "ZeroZ"

4

Суть вопроса: кнопки "обнулить XY", "обнулить Z" должны обнулять текущие рабочие координаты и сразу записывать текущие машинные как G54. Цель - после восстановления питания и хомления, по команде с одной...

iMaks-RS

Grbl Candle tool path problems

2

I am using Carveco Maker along with Grbl Candle controller for my Foxalien 40-40xe cnc router. As I change step over rates and save them to open in Candle, the...

hibb2007

Spindle rotation speed problem while using cnc3018 pro

1

When using cnc3018 pro, spindle rotation speed goes up and down. The spindle speed changes randomly during operation. The spindle speed changes from fast to slow.

jiwoonbae

Hi Max, I tested your two lines of code, and got z-depth readings that stayed within 1 micron of the 1st reading over a set of 10 readings - which is a great result!

1

Where did you put the lines?

Hostaler

Adding HeightMap to nc code occassionally drops the G01 command at the start of a line

1

**Versions** - Candle version: 1.2.15b - Firmware version: [e.g.: 0.9j, 1.1h] **PC info** - OS: … - OpenGL version: ... **Describe the bug** A clear and concise description of what...

0A47

Heightmap process seems to gradually lower Z flying height during processing until bit touches PCB during XY-move

4

**Versions** - Candle version: 1.1.7 - Firmware version: 1.1f - Milling Machine: CNC 1419 **PC info** - OS: Win10Pro **Describe the bug** Heightmap process seems to gradually lower Z flying...

poes8943

프로그램을 띄워 놓고 가동 시켜도 X YZ는 잘 작동되는데 스핀들 모터만 작동을 멈춰 있어요 프로그램 상에서는 스핀들 모터가 돌고 있는데 모가 문제인지 모르겠어요 기판에서는 전투기 날아가는 소리가 나네요 기판이 문제인가요...

dldmsgy