Dasharo
Display Port doesn't work| Protectli ADL| VP6650| VP6670
Component
other
Device
Protectli VP6650, Protectli VP6670, Protectli VP3230
Dasharo version
v0.9.0-rc7(VP66XX) , v0.9.0-rc2 (VP3230)
Dasharo Tools Suite version
No response
Test case ID
DSP003.001, DSP003.001
Brief summary
there is no output from DP
How reproducible
easily
How to reproduce
just plug a monitor via DP
or the auto test cases
Expected behavior
the screeen should display
Actual behavior
the screen claims there is no input signal from DP
Screenshots
No response
Additional context
automatic test's logs on vp6670(exact same results on 6650): DSP.zip
Solutions you've tried
No response
did you check with a DP to DP cable, or some kind of DP to HDMI / DVI or other kind of dongle? I believe at least one Protectli model has an eDP interface wired as the DP port, which only works with "pure" DisplayPort and not DP++, so no passive HDMI dongles will work.
It also depends on a monitor used. Irecall some monitors worked, some not. I think it had to do with 1920x1200 and 1920x1080 resolutions (the latter worked).
also the VP3230 seems to have the same problem, there is no signal on both HDMI and DP. From what i heard, at least hdmi worked on the orginal fw.
Tested rc4 with vp3230, both HDMI and DP work on Ubuntu and Windows
This one needs a recheck. In the test results sheet I can see that VP66xx v0.9.0 rc1 has all display tests PASS, then suddenly from rc6 some test fail...
This has been tested on v0.9.2 on VP6650 and VP6670, and doesn't occur anymore.
https://github.com/Dasharo/osfv-results/blob/main/boards/Protectli/VP66xx/VP6650_v0.9.2-rc1_results.csv https://github.com/Dasharo/osfv-results/blob/main/boards/Protectli/VP66xx/VP6670_v0.9.2-rc1_results.csv
