Danielhiversen
Wired Switch in Wireless Mode
Hi,
The wired Xiaomi wall switche (https://www.gearbest.com/alarm-systems/pp_610096.html?wid=1433363 + the others powdered models) support a mode referred to as "wireless mode" or sometimes "decoupled".
In normal mode:
- physically pressing the switch disconnects the live lighting circuit. You can also control the switch remotely, turning the live lighting circuit on/off.
In wireless/decoupled mode:
- physically pressing the switch DOES NOT disconnect the live lighting circuit. It simply triggers an event on the gateway (configured via the Mi Home app). The live lighting circuit can still be controlled, but only via the app (or HA..).
This wireless/decoupled state (pushed) is not currently tracked in HA. It's been discussed in a few places and although some people mentioned the gateway doesn't actually send the wireless/decoupled state, it doesn't look like anyone ever actually logged an issue here, so I'm not sure if that's the case?
Cheers!
Correct. The button(gateway) doesn't publish events in decoupled mode (at the LAN protocol v1!). As long as the firmware doesn't expose the events we are stuck.
Ah okay, just wanted to verify, thanks! That's a real bummer for my HA plans :(
Edit: I'm going to try skipping the gateway and communicating with the switches via zigbee usb module. I wonder then if they report anything..will report back in a few weeks as I don't have the hardware needed yet!