DVSVIDEO
DVSVIDEO
Unfortunately, I have suffered the same phenomenon. A few months ago I converted from direct wiring to CAN bus, but I'm starting to regret it. A 4 hour print stopped...
> This issue is related to the SB2240 undervoltage issue (#28). We seem to have the beginnings of a solution. > > https://github.com/jcheger/BTT-SB22xx-undervoltage-reset-issue/blob/main/README.md > > I did write a document...
Thank you for your reply. I am not a Linux expert. I did the whole Klipper/Mainsail installation by learning from a Youtube video, step by step. Next time, if everything...
The maximum temperature limit is set in the printer firmware. It's completely unnecessary to set this in the slicer. there are already too many settings, which makes life difficult for...
What's really annoying is that nowhere in the promotional material or on the vendor's site is it mentioned that it is not compatible with the 2209 CAN card... Biqu and...
Yes, I am interested. I've reported Prusa SLicer bugs and requests (and many others) https://github.com/prusa3d/PrusaSlicer/issues/9799 https://github.com/prusa3d/PrusaSlicer/issues/9353 https://github.com/prusa3d/PrusaSlicer/issues/9787 https://github.com/prusa3d/PrusaSlicer/issues/10131 https://github.com/prusa3d/PrusaSlicer/issues/8357
♥In the first lines there is the line that you checked for existing problems... This is a very old problem. Neither OrcaSlicer nor BambuSlicer existed when this bug was reported...
many-many problem in orcaslicer too 
If it is solved in PrusaSlicer, or solved in SuperSlicer, it will be taken over by OrcaSlicer. But there, despite twice as many reports, no results. Either it is very...
OrcaSlicer mouse ear? Why is that not good for you?