Denny Sheirer
Denny Sheirer
Closing as duplicate to #2
The error looks like you may have switched the audio mixer while channels were decoding and in the middle of playback. Does this error continue to occur, even when you...
Could you please post the full application log?
@IMG20191023 can you please try the latest nightly build to see if this resolves the issue? I updated a lot of the code to resolve issues with patch group management...
The frequency value (10297945700 = 10,297.945700 MHz) is invalid ... there are no trunked systems operating in the 10 GHz frequency range. One of the decoded messages, specifically a channel...
yes, in the channel configuration editor, in the Recording tab at the bottom, turn on the control channel bistream record option and then start the channel. It will record up...
I don't have access to any TETRA systems. If someone wants to make some baseband control channel recordings using the FM demodulator set to 25 kHz I might have time...
I need I/Q recordings made with sdrtrunk, using the FMNB demodulator with 25 khz channel filter. sdrtrunk should produce a roughly 50kHz sample rate I/Q recording when you enable 'Baseband...
@JustApu Yes, I opened that recording with baudline and it looks like a nice strong signal.
@adryd325 The 20240122_235425 file also looks like a good strong signal.