DHI
Dfs2 - static items (bathymetry)
Problem
When reading certain Dfs2's, e.g. model outputs from the FM egine the file often contains a static item that describes the bathymetry. This item is a perquisite in some of the processing tools or connected models (e.g. directional wave analysis or MIKE MA). When processing these files with mikeio the data is discarded, which naturally leads to problems.
Solution
Add an option to read/write the static bathy item
Alternatives considered
Using mikecore I can get around this. But we like to use mikeio for simplicity. I haven't seen any other issues related to this.
Is bathymetry the only example of where a static item is used (in practice), or are there other examples?
Is bathymetry the only example of where a static item is used (in practice), or are there other examples?
Bathymetry is the only example that I'm aware of.
I am a bit hesitant if this should be part of MIKE IO, I was under the impression that Dfs2 output from HD models was legacy.
But one option could be to add the Bathymetry to the Grid2D geometry property.
From: stkistner @.> Sent: Thursday, March 21, 2024 2:58:21 PM To: DHI/mikeio @.> Cc: Henrik Andersson @.>; Comment @.> Subject: Re: [DHI/mikeio] Dfs2 - static items (bathymetry) (Issue #677)
Is bathymetry the only example of where a static item is used (in practice), or are there other examples?
Bathymetry is the only example that I'm aware of.
— Reply to this email directly, view it on GitHubhttps://github.com/DHI/mikeio/issues/677#issuecomment-2012375114, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AAEV6RZKC6IWWKOXNIDCBX3YZLRP3AVCNFSM6AAAAABFBMT4B2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJSGM3TKMJRGQ. You are receiving this because you commented.Message ID: @.***>
The FM engine can output dfs2 in a gridded overlay. That is not a legacy output. I don't know, however, whether it contains any static bathymetry 🤔
I extracted a Dfs2 this morning from a Dfsu, and that did extract the bathy data too.
But I know this is for 1 out of 100 applications. In the meantime I've managed to re-add the bathy using mikecore, but a a mikeio implementation would be nice 😉
Let's add the bathymetry as an optional attribute to the Grid2D data structure.