Mainak Mondal

Hi, I am getting the same behaviour, I have all the dependencies sorted out. I am using Ubuntu 18.04. And I figured it was not a firewall issue, I think...

Also just in case can you tell me which port does it use to listen to the video? is it 9617?

Sorry my bad, I reran the performance script and also this command - "sudo cpupower frequency-set --governor performance" , and ensured that the CPUs are set to performance mode. I...

Installed srsran4g on the Jetson TX2 and tweaked the config a bit but still i cant establish connection. (also rerunning the performance script helped a bit, gNb overflows and underflows...

Still the same - here are the logs. (also my Samsung S23 ultra cannot see the network when I do a network search, I understand it cant connect (without a...

I also tried running the UE from another x86 system (Core i7 11th gen and 16gb of RAM), just to check if its a performance issue. But it was the...

@pgawlowicz , thanks a lot for taking the time to help me out - Here are the logs with the suggested changes. I still cant establish connection with the b210s...

That makes sense, I changed both srate to 5.76 , now it shows RRC connected, but then it is released right after - The ip address is not assigned, there...

Ohh, I understand, here are the new logs with the patch - [gnb.log.txt](https://github.com/user-attachments/files/16288283/gnb.log.txt) [ue.log.txt](https://github.com/user-attachments/files/16288284/ue.log.txt)

Hi I did apply it locally, but now I forked it and applied the patch (ensured the changes) and here is the new log file - [gnb.log.txt](https://github.com/user-attachments/files/16289792/gnb.log.txt) [ue.log.txt](https://github.com/user-attachments/files/16289793/ue.log.txt)