Eric Banker

The files I used were modified from existing stl's and custom made files I did using 3d Builder. Some I have 3mf files for but most only in stl.

The sound board is one of the things that can be tested outside of the full software using a tutorial from adafruit. I always recommend people test the audio board...

Most of the sound clips are quite small. I actually use the same board with my droid which has a lot more audio than this one. That project has about...

which code are you using? I have seen slowness if the audio board is not connected or not setup correctly with the non spirit code. I've never seen the spirit...

You can comment out the code that calls the audio board. The slowdown is caused by something in the library for the board. The spirit code is wired slightly differently...

There are different multi led sticks that are triggered differently. I've run into this once before. Do you have a link to the sticks you purchased? The detail you are...

this is the correct one for future reference. https://www.amazon.com/Adafruit-NeoPixel-Arduino-Integrated-Drivers/dp/B00IEDH26K/? you can probably get those cool white ones to work but you would need to play with the code to get...