Corey-Harding

I didn't notice the offending issue either. It might work, I could have had an issue with my physical ac switch or that input. I was still trying on A8...

Here is my branch that now has merge conflicts with current master but it didnt work when I tested it with A8 in its current state. I also never thoroughly...

> > See last 2 commits, the bug is fixed. It was a problem with the page 15 stuff, the bytes were misaligned. > > Should be all good to...

I am in favor of this PR also. I daily drive my car and have my open+closed loop idle pretty dialed in from 40F-100F IAT but once I hit 110F...

13.9 target Ego is usually +/-2% Spark is between 15-19 around target area Its not hunting forever at those temps I just notice it dive then hit target and then...

I looked back on my old tunes and my pwm duty cycle was higher before I enabled ol+cl idle. But once i enabled ol+cl and started messing with settings I...

I have my ol+cl idle nearly perfect now thanks to comments above. It only had issues at high iat + high acc load and the issue was that it would...

I was able to workaround this bug by modifying the following line in globals.h https://github.com/noisymime/speeduino/blob/93de5eecda3bc288394da73b998331080694e877/speeduino/globals.h#L607 to read `#define pinIsUsed(pin) ( pinIsInjector((pin)) || pinIsIgnition((pin)) || pinIsSensor((pin)) || pinIsReserved((pin)) ) //|| pinIsOutput((pin))`...

Im confused because A8 is free in the init I even commented the sparetemp1 out and it had no effect ``` case 41: #ifndef SMALL_FLASH_MODE //No support for bluepill here...

I tried out #549 it didnt work for me in this case