Servo Motor Replacement: EMAX ES08A II vs. Tower Pro MG90S

Open BiyolojiMeb opened this issue 11 months ago • 2 comments

Hello, I can't find the EMAX ES08A II servo motor. Would it be okay if I use the Tower Pro MG90S instead? Thanks!

Dec 25 '24 13:12 BiyolojiMeb

Hi, you should be able to use any micro servo, but you have to check the exact dimensions. The 3D-printed parts and especially the screw holes will probably not fit without some modifications. Generally, I would recommend using the ES08A or a higher quality servo. The MG90S are not as fast and precise as the ES08A.

Dec 25 '24 15:12 CoretechR

Hi, you should be able to use any micro servo, but you have to check the exact dimensions. The 3D-printed parts and especially the screw holes will probably not fit without some modifications. Generally, I would recommend using the ES08A or a higher quality servo. The MG90S are not as fast and precise as the ES08A.

thankyou

Dec 28 '24 11:12 tianyi725