another_brother Label format request

Hello,

I'm trying to add support in my app for the TD-2125N but I would need the RD_W51H26mm label format for it. I'm only seeing W57mm or W40_H40mm.

Would it be possible to add this format?

Thank you very much!

Jul 11 '24 13:07 PrimaelQuemerais

Hi @PrimaelQuemerais ,

Thanks for reaching out about this. In order to add support for that paper we would need a .bin file generated for that printer and paper size.

If you could send us a working bin file we can go ahead and update the library.

Thanks again,

Jul 11 '24 15:07 CodeMinion

Thank you for the quick reply!

I do not have the printer myself but I asked a colleague to generate one, I do not know if it is working. Here is a link to the generated files : https://drive.google.com/drive/folders/1FbhseM3ce6-vcggUw4cWznfuPBOo46SC?usp=share_link

Let me know if there is anything else I can help with.

Jul 11 '24 15:07 PrimaelQuemerais

Hello @CodeMinion !

Sorry for bumping this up, were you able to have a look?

Thank you so much for your time!

Jul 15 '24 15:07 PrimaelQuemerais

Hi @PrimaelQuemerais ,

No apologies necessary. Version 2.1.7 has just been released with the bin paper you shared. Since I don't have a way to verify if the paper works I'll leave this issue open until we get confirmation from you that it's working correctly.

Jul 21 '24 19:07 CodeMinion

Thank you so much @CodeMinion !

I will build a new version of our app tomorrow, have it tested and will let you know right away!

Jul 21 '24 19:07 PrimaelQuemerais

Hi @CodeMinion! So I had the new version tested and it doesn't work. The app crashes when trying to print using the new label. I'm getting a TD-2125N delivered to me so I can generate a new bin file and test everything on my own. I will keep you updated!

Jul 25 '24 08:07 PrimaelQuemerais

Hi @PrimaelQuemerais !

Bummer about the failure but thanks for looking into it further. Don't hesitate to share the bin file ones you have it and we can go ahead and add it.

Thanks for the support,

Jul 25 '24 15:07 CodeMinion

Hello @CodeMinion! I just created a new pull request. I used a new bin file and was able to test with a TD2125N. Everything seem to be working fine

Jul 29 '24 09:07 PrimaelQuemerais

Hi @PrimaelQuemerais !

Thanks for testing and the fix. I have merged the changed and released version 2.1.8 to pub.dev. It should become available in 10 minutes or so for usage.

Thanks again,

Jul 29 '24 17:07 CodeMinion

Hello @CodeMinion Thank you for the reactivity. I can confirm everything is working fine in the latest version.

Closing the issue now

Aug 02 '24 06:08 PrimaelQuemerais