robovac C10 not showing

Eufy Robot Vacuum C10 is not showing up after logging into integration

Jul 12 '25 20:07 DayandAge27

I'm having same - is this model not supported?

Jul 13 '25 05:07 warmfire540

same problem here

Jul 16 '25 13:07 cinghialino

same problem with the C20

Jul 17 '25 01:07 jsdray

same problem with the C20

Same :(

Jul 19 '25 06:07 SilentConfig

+1 for missing device with C20

Jul 25 '25 09:07 mgit22

Same for C10

Aug 15 '25 18:08 mroobol6

I had luck with https://github.com/jeppesens/eufy-clean

Aug 17 '25 03:08 danielandastro

Thanks for your response; I'll give that a shot. I had tried adding the series T2292 to robovac.py, by modeling a new T2292 entry after the existing entries, as you know this was not sufficient. Again, thanks for taking the time. Take care.

On Sat, Aug 16, 2025 at 10:49 PM Daniel Shroff @.***> wrote:

danielandastro left a comment (CodeFoodPixels/robovac#126) https://github.com/CodeFoodPixels/robovac/issues/126#issuecomment-3194104756

I had luck with https://github.com/jeppesens/eufy-clean

— Reply to this email directly, view it on GitHub https://github.com/CodeFoodPixels/robovac/issues/126#issuecomment-3194104756, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCUA5ZEVCXSJ7G3SZBSVJOL3N73UTAVCNFSM6AAAAACBMDQZMSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTCOJUGEYDINZVGY . You are receiving this because you commented.Message ID: @.***>

Aug 17 '25 15:08 mroobol6