Patrick Schmidt
Patrick Schmidt
Closed as this seems to be fixed
You'll need to make sure that python 3.x is installed. Since your running on a creality machine there is a high possibly that this is not possible due to the...
Hey, the app will try to connect to the IP with a timeout you can change on the printer settings page within the app. Since the screenshot shows that you...
Hey, Mobileraker currently only supports WebRtc (Camstreamer, MediaMtx, Go2Rtc) and mjpeg. Can you provide me a screenshot of the webcam settings of fluidd/mainsail. I will see if I am able...
Hey, I'm sorry to hear about the issue. I took a quick look at the klippy file you provided, and it seems to me like the host is overloaded and...
Closed for now. Reopen if the issue persists
Hey, the`%20` is a space encoded for the URL. Double check that the configured webcam does not have a leading space character. Alternatively, you can always use an absolute URL...
> @Clon1998 I double checked my Fluidd Webcam section (it is also in the screenshot above) and there is not a leading space character. > > How do I set...
> These are the only settings that I have available while having a MCU disconnected. > > Got it. That's definitely an UX error on my end. I will address...
> I was able to get my MCU hooked up and Mobileraker fully up and working. I did find that by default, I had the "%20" in front of both...