Cleric-K

I use x6b myself and have not problem with failsafe. But my transmitter is fs-i6x. Flysky receivers are two types: 1/ the cheaper ones without failsafe like a8s. They simply...

I looked at the TH9X [manual](https://static1.squarespace.com/static/5bc852d6b9144934c40d499c/t/5c62387fe2c48311c8948a4a/1549941012543/FS-TH9X+User+Manual+20170721.pdf) and it seems that it should be possible to configure that failsafe behavior. The procedure should be the same as with fs-i6(x): 1. Set...

Well, if the current firmware is not locked you can back it up and try the ia10b. There's always slight risk of damage if the hardware is different and some...

 These are the pins according to the datasheet. You can see if they go to the pads.

> do you thik it can be changed to pair with the flysky i6 somehow? I probably shouldn't try flashing with ia10b firmware until the original bin file has been...

If this receiver doesn't bind to i6 chances are they use some modified flysky air protocol. Theoretically there should be no problem to use the hardware base also for regular...

Great! To be honest I didn't expect this to work :) The receivers seemed too dissimilar. If you're feeling adventurous you can play with TX firmwares through ST-Link. These TXes...

Is this the _only_ difference?

It's quite doubtful that this would be the solution. I don't have much time now but when I get the chance I'll look at the disassembled code. Can you bind...

If anyone can report if fly3d can bind to regular flysky rxes this will be indicative if they use _different_ binding procedure (that is - modified air protocol). If that...