Cigareoc

> Good morning! I created script with zone/segment,after robot start with this script after 1s it stop and going to base,not start to clean with coordinates, I can send you...

> Show me vevs logs. this is last with selection zone like the photo,vacuum start and me after 5s-10s stopped it and it going to base here is link from...

it seems to me that this is how it works, but it starts and after 10-15 seconds status said stand-by and it goes back and loses the map sequence: -...

> Do these vevs logs contain the records of you performing zone cleaning through MiHome APP ? > > > And tell me the approximate time you performing zone cleaning...

> According to your logs, this should be the correct script. > > ```yaml > sequence: > - service: xiaomi_miot.set_miot_property > data: > entity_id: vacuum.viomi_v19_4b59_robot_cleaner > siid: 6 # point-zone...

good morning!!!!not working with e1  

[aqara gateway m2 m1s,h1,p3.log](https://github.com/user-attachments/files/17400940/aqara.gateway.m2.m1s.h1.p3.log) [multimode gateway 2,hub e1 log.log](https://github.com/user-attachments/files/17400941/multimode.gateway.2.hub.e1.log.log)

For m1S aqara gateway is different board

I mean about To interrupt uboot, you need use short CLK pin (pin 6) and GND pin or CS Pin (pin 1) and Vcc pin while uboot reading kernel. Notice:...

without success, I connected according to the instructions, but the password does not clear see log [New Text Document.txt](https://github.com/user-attachments/files/17409987/New.Text.Document.txt)